verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ32X200-10S

The AirTAC SEJ Adjustable Cylinder SEJ32X200-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø32mm unit covers an effective stroke of 190–200mm without changing cylinders. Force is equal in both directions.

  • BoreØ32 mm
  • Nominal stroke200 mm
  • Adjust window10 mm
  • Effective stroke190–200 mm
  • Port sizePT1/8
  • CushionAdjustable, 27 mm
$81.18 $88.68Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ32 stroke, mounting and version on one page All SEJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ32X200-10S

The AirTAC SEJ32X200-10S is a double-acting, double-rod ISO 15552 profile cylinder. The retract stroke is mechanically adjustable via a back-rod stop screw, providing an effective 190-200 mm stroke range for precision machine commissioning.

This 32 mm bore unit includes a magnet for CMSE or DMSE sensors and features field-adjustable air cushions at both ends. The extruded aluminum barrel carries no external tie rods, and the PT1/8 port matches the 12 mm rod and M10x1.25 thread. Lock the stop screw after setting your end position; the cushion only decelerates near stroke end and does not hold the load on air loss.

Airtac SEJ Adjustable Cylinder SEJ32X200-10S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ32X200-10S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ32 mm
Nominal stroke200 mm
Adjustment window10 mm (190–200 mm)
ConfigurationDouble rod, double acting
Port sizePT1/8
Rod threadM10×1.25
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø32mm)

PressureForce (both directions)
0.5 MPa346 N
0.7 MPa484 N
Max (@1.0 MPa)70 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ32X200-10S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
32Bore size in mm.
×200Nominal stroke length in mm.
-10Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ32X200-10S Is Used

precision_manufacturing

PCB Conveyor Stop Dial-In

Provides 345 N of equal both-way force at 0.5 MPa to halt populated boards, using the 10 mm retract window to perfectly align the stop pin during line commissioning.

swap_horiz

Packaging Changeover

Dial in the 190-200 mm effective stroke to match different carton heights on a packaging machine, locking the back-rod stop screw after positioning the flap folding arm.

science

Lab Dispenser Positioning

Test exact nozzle depth against a variable-height tray by adjusting the retract end, relying on the 12 mm rod and M10x1.25 thread to handle minor side loads during liquid filling.

Is the Airtac SEJ Adjustable Cylinder SEJ32X200-10S the Right Cylinder?

Verify the 10 mm adjustment window covers your fine-tuning range before ordering. If you need less force, no smaller SEJ bore exists, but if you require more thrust, stepping up to the 40 mm bore yields 528 N both ways at 0.5 MPa. If your application never requires end-position adjustment, a fixed-stroke SED cylinder provides the same double-rod stability. For fail-safe load holding on air loss, add an external rod lock, as the adjustable stop is not a brake. Ensure your ISO 15552 replacement matches this 32 mm bore, 200 mm stroke, PT1/8 port, and magnet option.

AirtacDistr lists every SEJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sej32-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (10mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 10mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ32X200-10S FAQ

The retract stroke is adjustable over a 10 mm window via a mechanical stop screw on the back rod, giving an effective stroke range of 190 to 200 mm. You lock the screw after finding the exact end position.

Because it is a double-rod cylinder, the force is identical in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ32X200-10S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ32X200-10S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.