
The AirTAC SEJ Adjustable Cylinder SEJ32X200-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø32mm unit covers an effective stroke of 160–200mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X200-40S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 40mm adjustable stroke window. You can dial the retract end from 160 to 200mm to perfectly match a mechanical stop during machine commissioning. Because a rod exits both ends, the annulus area is identical in both directions, yielding an equal drive force of 345N each way at 0.5 MPa.
This extruded aluminum barrel design includes a magnet for CMSE reed or DMSE electronic sensors. The rear rod stop screw lets you set the precise end position and lock it down, while field-adjustable air cushions at both ends decelerate the 12mm rod near stroke extremes. It operates at 30-800 mm/s with a PT1/8 port.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X200-40S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 200 mm |
| Adjustment window | 40 mm (160–200 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -40 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 160-200mm retract stop to perfectly align a backgauge on a press brake, utilizing the equal 345N both-way force for consistent positioning.
Adjust the stroke end on the fly to accommodate different carton heights on a packaging line without swapping out the entire cylinder hardware.
Micro-adjust the end point during robotic pick-and-place commissioning to find the exact gripping distance before locking the stop screw.
Confirm the 40mm adjustment window covers your required end-position range. If you need less force, the next bore down does not exist in this series, so a 32mm is the baseline. If your application requires more push, stepping up to the 40mm bore provides 528N both ways at 0.5 MPa. If your stroke never changes after commissioning, a fixed-stroke SED is sufficient.
For ISO 15552 replacement matching, verify the 200mm stroke, 160-200mm window, PT1/8 port, and your mounting choice from the SEJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). Remember that a plain SEJ does not hold position on air loss; the stop screw only sets the mechanical end, so for fail-safe holding point to an external rod lock or BSED. At 200mm stroke, external guides are recommended to manage side loads on the 12mm rod.
Quick checklist
The retract end features a stop screw that allows you to dial the stroke over a 40mm window, giving an effective stroke range of 160 to 200mm.
Because the rod exits both ends, force is equal in both directions: 345N at 0.5 MPa, 483N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.