verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ32X220-20S

The AirTAC SEJ Adjustable Cylinder SEJ32X220-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø32mm unit covers an effective stroke of 200–220mm without changing cylinders. Force is equal in both directions.

  • BoreØ32 mm
  • Nominal stroke220 mm
  • Adjust window20 mm
  • Effective stroke200–220 mm
  • Port sizePT1/8
  • CushionAdjustable, 27 mm
$83.97 $91.47Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ32 stroke, mounting and version on one page All SEJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ32X220-20S

The AirTAC SEJ32X220-20S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20 mm adjustable retract window, yielding an effective stroke range of 200-220 mm. The built-in -S magnet supports CMSE reed and DMSE electronic position sensing.

You dial in the exact end position by turning the stop screw on the back rod, then locking it in place during machine commissioning. This extruded aluminum barrel design omits external tie rods and includes field-adjustable air cushions at both ends to decelerate the load near stroke limits.

Airtac SEJ Adjustable Cylinder SEJ32X220-20S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ32X220-20S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ32 mm
Nominal stroke220 mm
Adjustment window20 mm (200–220 mm)
ConfigurationDouble rod, double acting
Port sizePT1/8
Rod threadM10×1.25
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø32mm)

PressureForce (both directions)
0.5 MPa346 N
0.7 MPa484 N
Max (@1.0 MPa)70 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ32X220-20S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
32Bore size in mm.
×220Nominal stroke length in mm.
-20Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ32X220-20S Is Used

tune

Packaging Flap Folding

Dial in the 200-220 mm retract stroke to perfectly match varying carton depths, using the equal 345 N both-way force to consistently tuck flaps without crushing the packaging.

swap_horiz

Assembly Line Changeover

Quickly reposition the mechanical stop screw to transition between different product heights on a conveyor, leveraging the 20 mm adjustment window to skip custom spacers.

Is the Airtac SEJ Adjustable Cylinder SEJ32X220-20S the Right Cylinder?

Verify the 20 mm adjustment window covers your required end-position variance; for higher force, stepping up to the 40 mm bore provides 528 N both ways at 0.5 MPa, while dropping to a fixed-stroke SED32 avoids the back-rod hardware if no adjustment is needed. Because this 220 mm stroke exceeds 300 mm? No, but for long loads, external guides are recommended to manage side-load leverage on the 12 mm rod. The air cushion decelerates the load but does not hold position on air loss; for fail-safe holding, specify a BSED or an external rod lock. Ensure your ISO 15552 replacement matches the PT1/8 port, M10x1.25 rod thread, and desired mounting from the SEJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2).

AirtacDistr lists every SEJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sej32-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (20mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 20mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ32X220-20S FAQ

A stop screw on the rear rod lets you mechanically shorten the retract stroke over a 20 mm window. The effective stroke range is 200-220 mm, which you set and lock during commissioning to match a precise machine stop.

Because a rod exits both ends, the force is identical in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ32X220-20S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ32X220-20S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.