Airtac SE32 Standard Cylinder SE32X220
The AirTAC Airtac SE32 Standard Cylinder SE32X220 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 220mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke220 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X220
The AirTAC SE32X220 is a double-acting single-rod ISO 15552 profile cylinder engineered for compact pneumatics, delivering 402 N of push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a smooth, corrosion-resistant body that mounts flush against machine frames while housing standard PT1/8 ports and a 12 mm hard-chrome rod.
Because this 220 mm stroke exceeds the standard 1000 mm maximum for the 32 mm bore, it is supplied as a non-standard made-to-order unit. The cylinder incorporates field-adjustable pneumatic cushioning at both ends to decelerate the piston near stroke end, though this SKU lacks the internal magnet required for CMSE or DMSE position sensing.
Airtac SE32 Standard Cylinder SE32X220 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X220 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X220
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X220 Is Used
PCB Router Z-Axis
Drives the vertical plunge of a light-duty PCB routing spindle, using its 402 N push force to cleanly break through 1.6 mm FR4 material.
Carton Flap Folder
Actuates a mechanical arm to fold small corrugated carton flaps at speed, relying on the smooth profile barrel to avoid snagging packaging film.
Lab Sample Dispenser
Pushes a 96-well plate tray forward 220 mm into a scanning station, utilizing the adjustable end cushions to prevent liquid spillage from sudden stops.
Is the Airtac SE32 Standard Cylinder SE32X220 the Right Cylinder?
When sizing this 32 mm bore, compare its 402 N push at 0.5 MPa against your actual load. If your application demands less force, stepping down is not an option as 32 mm is the smallest available SE bore. If you need significantly more power, step up to the 40 mm bore which provides 628 N of push at 0.5 MPa. Remember that a plain SE cylinder will drift if air pressure is lost; if your process requires strict position holding without live pressure, you must integrate an external rod lock or pilot-operated check valve.
With a 220 mm stroke on a 12 mm rod, the unsupported piston rod is highly susceptible to bending under side loads. Always use an external guide to prevent rod-bearing wear and seal damage. For retrofits, this cylinder is dimensionally interchangeable per ISO 15552, matching the 32 mm bore, 220 mm stroke, PT1/8 port, and standard mounting accessories without requiring custom brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X220 FAQ
At 0.5 MPa, the SE32X220 provides 402 N of push force and 345 N of pull force due to its single-rod design. At 0.7 MPa, the push force increases to 563 N. The maximum push force is 82 kgf when operated at the maximum pressure of 1.0 MPa.
This specific SE32X220 SKU does not include a built-in magnet, so it cannot support AirTAC CMSE reed or DMSE electronic position sensors. If your application requires end-of-stroke detection, you must select a model with the -S option code to include the internal magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X220
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.