
The AirTAC SEJ Adjustable Cylinder SEJ32X25-20 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø32mm unit covers an effective stroke of 5–25mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X25-20 is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions at 345 N each way at 0.5 MPa. The retract stroke is mechanically adjustable via a back-rod stop screw over a 20 mm window, giving an effective stroke range of 5-25 mm.
This 32 mm bore unit runs at 30-800 mm/s with a PT1/8 port and a Ø12 mm rod. It features field-adjustable air cushions at both ends to manage deceleration. The extruded aluminum barrel design omits external tie rods, and this SKU ships without a magnet, so it lacks position sensing out of the box.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X25-20 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 25 mm |
| Adjustment window | 20 mm (5–25 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 5-25 mm effective stroke during machine commissioning to match a precise 345 N clamping position at 0.5 MPa without swapping hardware.
Adjust the retract stop on the fly to accommodate varying workpiece heights on a conveyor, using the equal both-way force for consistent pressing.
Use the 20 mm adjustment window to test multiple end-stop points for a light-duty assembly jig before locking the back-rod screw for production.
Confirm the 20 mm adjustment window covers your end-position tuning needs across the 5-25 mm effective range. Stepping down is not an option as 32 mm is the smallest SEJ bore, but stepping up to the 40 mm bore yields 528 N both ways at 0.5 MPa if your load requires more force. If your application needs a fixed end position and no on-machine fine-tuning, a standard SED double-rod cylinder is sufficient. For trial positioning or changeover between different part heights, this adjustable stop screw is ideal. Remember that the air cushion and mechanical stop screw decelerate the piston and set the end point; they do not hold position on air loss, so an external rod lock is needed for fail-safe holding. When matching an ISO 15552 replacement, verify the 25 mm nominal stroke, 20 mm window, PT1/8 port, and mounting choice from the available Basic, FA, LB, TC, FTC, TCM1, or TCM2 sets.
Quick checklist
The retract stroke is adjustable over a 20 mm window via a stop screw on the back rod. This gives an effective stroke range of 5-25 mm, allowing precise mechanical fine-tuning of the end position on the machine.
Because a rod exits both ends, force is identical in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.