
The AirTAC SEJ Adjustable Cylinder SEJ32X25-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø32mm unit covers an effective stroke of 5–25mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X25-20S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions. This delivers equal force extend and retract—345 N each way at 0.5 MPa and 483 N each way at 0.7 MPa. You can dial the retract end from 5 to 25 mm using a stop screw on the back rod, letting you fine-tune the end position on the machine without swapping hardware.
The extruded aluminum barrel contains no external tie rods, ensuring clean, dimensionally interchangeable ISO 15552 mounting. It includes field-adjustable air cushions at both ends to decelerate the 12 mm rod near stroke limits. Equipped with a magnet (-S), it supports CMSE reed and DMSE electronic sensors for position feedback. Operating speed spans 30-800 mm/s via the PT1/8 port.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X25-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 25 mm |
| Adjustment window | 20 mm (5–25 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in precise 5-25mm pressing depths for small bearing insertion, utilizing the equal 483 N both-way force to seat and release parts cleanly.
Adjust the retract stop on packaging machines to handle varying carton heights without swapping out the entire cylinder assembly.
Use the 20mm window to test clamping positions on R&D jigs, fine-tuning the exact end point before locking the back-rod screw.
The 20 mm adjustment window is ideal for dialing in short, precise end positions, but if your stroke requirement exceeds 25 mm, step up to a longer nominal stroke. If you need less force, there is no smaller SEJ bore, but if you need more power, the next size up is bore 40, delivering 528 N both ways at 0.5 MPa. If your application never requires stroke changes, a fixed-stroke SED cylinder provides a simpler setup.
For positioning safety, note that this cylinder does not hold its position on air loss—the adjustable cushion and stop screw only set the mechanical end and decelerate near stroke end, acting as neither a lock nor a brake. When matching an ISO 15552 replacement, verify the 32 mm bore, 5-25 mm effective range, PT1/8 port, and magnet option.
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke over a 20 mm window. The effective stroke range is 5 to 25 mm, which you set and lock on the machine during commissioning.
Because it is a double-rod cylinder, force is equal both ways: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.