
The AirTAC SEJ Adjustable Cylinder SEJ32X250-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø32mm unit covers an effective stroke of 150–250mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X250-100S is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions at 345 N each way at 0.5 MPa. The retract stroke is mechanically adjustable via a stop screw on the back rod over a 100 mm window, giving an effective stroke range of 150 to 250 mm.
It features field-adjustable air cushions at both ends and a built-in magnet for CMSE or DMSE position detection.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X250-100S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 250 mm |
| Adjustment window | 100 mm (150–250 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×250 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 150-250 mm stroke to precisely set the flap folding end position on varying carton sizes, using the equal 345 N both-way force to push and retract consistently.
Adjust the retract stop to quickly switch part-stop heights during product family changeover on a conveyor, locking the back-rod screw once the new position is set.
Trial position a light-duty 483 N press operation at 0.7 MPa, fine-tuning the 100 mm window during R&D before finalizing the exact end-of-stroke mechanical stop.
Confirm the 100 mm adjustment window covers your positioning range. If you need less than 150 mm effective stroke, step down to a shorter base cylinder. For higher force, the next bore up is 40 mm yielding 528 N both ways at 0.5 MPa; if you can accept less force, there is no smaller standard SEJ bore. If the stroke never varies after commissioning, a fixed-stroke SED is sufficient. A plain SEJ does not hold position on air loss; for fail-safe holding use a BSED or an external rod lock. When replacing an ISO 15552 cylinder, match the 32 mm bore, 250 mm nominal stroke, PT1/8 port, and mounting. Because the stroke is 250 mm, use external guides to prevent side-load wear on the seals.
AirtacDistr lists every SEJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sej32-adjustable-cylinder
Quick checklist
The retract stroke is adjustable via a stop screw on the back rod over a 100 mm window. The effective stroke range is 150 to 250 mm. You dial in the exact end position during machine commissioning and lock it.
Because the rod exits both ends, the force is equal in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.