verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ32X250-20S

The AirTAC SEJ Adjustable Cylinder SEJ32X250-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø32mm unit covers an effective stroke of 230–250mm without changing cylinders. Force is equal in both directions.

  • BoreØ32 mm
  • Nominal stroke250 mm
  • Adjust window20 mm
  • Effective stroke230–250 mm
  • Port sizePT1/8
  • CushionAdjustable, 27 mm
$86.76 $94.26Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ32 stroke, mounting and version on one page All SEJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ32X250-20S

The AirTAC SEJ32X250-20S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions. This yields an equal force of 345 N each way at 0.5 MPa. You can dial the retract end up to 20 mm, giving an effective stroke range of 230-250 mm for precise mechanical tuning during commissioning.

This 32 mm bore unit includes a magnet for CMSE or DMSE sensors and uses adjustable air cushions at both ends to decelerate the load near stroke end. The rear rod extends overall length compared to a single-rod SE but provides a convenient mounting point for a cam or flag. It operates at 30-800 mm/s with a PT1/8 port and M10x1.25 rod thread.

Airtac SEJ Adjustable Cylinder SEJ32X250-20S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ32X250-20S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ32 mm
Nominal stroke250 mm
Adjustment window20 mm (230–250 mm)
ConfigurationDouble rod, double acting
Port sizePT1/8
Rod threadM10×1.25
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø32mm)

PressureForce (both directions)
0.5 MPa346 N
0.7 MPa484 N
Max (@1.0 MPa)70 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ32X250-20S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
32Bore size in mm.
×250Nominal stroke length in mm.
-20Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ32X250-20S Is Used

precision_manufacturing

Print Head Registration

Dial in the 230-250 mm retract stop to perfectly match print head height on flexible packaging machines, using the equal 345 N both-way force for clean contact.

swap_horiz

Product Changeover

Adjust the end position up to 20 mm on a packaging conveyor when switching carton sizes, avoiding hardware swaps while maintaining precise positioning.

tune

Trial Positioning

Fine-tune the clamping depth on small electronic component testers during commissioning, leveraging the 483 N retract force at 0.7 MPa for secure holds.

Is the Airtac SEJ Adjustable Cylinder SEJ32X250-20S the Right Cylinder?

Verify the 20 mm adjustment window covers your variable-stop range before ordering. If you need less force, the adjacent 32 mm bore is the smallest available SEJ size. If your application requires more push or pull, stepping up to the 40 mm bore yields 528 N both ways at 0.5 MPa. If your end position never changes after initial setup, a fixed-stroke SED cylinder is sufficient. This SEJ does not hold position on air loss; the stop screw and air cushions only set the mechanical end and decelerate, so specify an external rod lock for fail-safe holding.

Because the 250 mm stroke exceeds 300 mm when combined with the cylinder body, ensure external guides support side loads to prevent rod binding. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). It is dimensionally interchangeable per ISO 15552.

AirtacDistr lists every SEJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sej32-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (20mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 20mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ32X250-20S FAQ

The retract stroke can be adjusted up to 20 mm using a stop screw on the back rod. This gives an effective stroke range of 230 to 250 mm. You lock the screw after setting the exact end position.

Because it is a double-rod cylinder, the force is equal in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ32X250-20S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ32X250-20S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.