
The AirTAC SEJ Adjustable Cylinder SEJ32X250-75S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 75mm window, so this Ø32mm unit covers an effective stroke of 175–250mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X250-75S is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, yielding identical annular areas so output force is exactly the same in extend and retract: 345 N each way at 0.5 MPa. A stop screw on the back rod lets you mechanically dial the retract end across a 75 mm window, giving an effective stroke range of 175 to 250 mm.
Because the unit carries the -S magnet, it supports CMSE reed and DMSE electronic sensors for end-of-stroke detection. The extruded aluminum barrel omits external tie rods, and adjustable air cushions at both ends decelerate the piston near stroke ends. The standard PT1/8 porting and M10x1.25 rod thread match the 32 mm bore specification.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X250-75S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 250 mm |
| Adjustment window | 75 mm (175–250 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 75mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×250 | Nominal stroke length in mm. |
| -75 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 175-250 mm clamping depth on machining fixtures to accommodate multiple part heights without swapping out cylinders.
Adjust the retract stop up to 75 mm on packaging conveyor lines to handle different carton sizes on the fly using 345 N of both-way force.
Set precise end positions during R&D jig assembly, locking the back-rod stop screw once the optimal stroke is found for the test.
This 75 mm adjustment window is ideal for commissioning fine-tune positioning or matching variable stops without changing hardware. If your application requires less force, stepping down is not an option below 32 mm in this series, but if you need significantly more thrust, the 40 mm bore delivers 528 N each way at 0.5 MPa. If your stroke never varies, a fixed-stroke SED cylinder provides the same double-rod stability without the adjustment mechanism.
For ISO 15552 replacement matching, verify the 250 mm nominal stroke, 75 mm window, PT1/8 port, and your required mounting from the SEJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that the air cushion and mechanical stop screw only decelerate the load and set the end position; they do not hold the load on air loss. For fail-safe holding, use an external rod lock like BSED. At 250 mm stroke, ensure external guides support side loads to prevent rod binding.
AirtacDistr lists every SEJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sej32-adjustable-cylinder
Quick checklist
A stop screw on the back rod mechanically shortens the retract stroke over a 75 mm window. You can dial the effective stroke anywhere from 175 mm up to the full 250 mm, then lock it in place.
Because the rod exits both ends, force is equal in both directions. It produces 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.