
The AirTAC SEJ Adjustable Cylinder SEJ32X30-30 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø32mm unit covers an effective stroke of 0–30mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X30-30 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30 mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions, yielding an equal force of 345 N each way at 0.5 MPa. By turning the stop screw on the back rod, you can dial the retract end position down to 0 mm, giving you an effective stroke range of 0-30 mm for exact machine commissioning.
This 32 mm bore unit uses a PT1/8 port and a Ø12 mm rod with an M10x1.25 thread. It features field-adjustable air cushions at both ends to decelerate the load near the stroke terminus. This SKU omits the magnet, so it does not support CMSE or DMSE position sensing. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X30-30 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 30 mm |
| Adjustment window | 30 mm (0–30 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 0-30 mm closing position on automated gripper jaws during first-article commissioning, utilizing the 345 N both-way force to securely clamp light parts.
Adjust the retract stop on a conveyor pusher to handle different carton lengths without swapping hardware, relying on the equal push/pull annulus area for smooth motion.
Use the back rod as a mechanical flag to fine-tune a trial positioning jig for electronic component placement, locking the stop screw precisely once the ideal end point is found.
Verify that the 0-30 mm adjustment window fully covers your application's fine-tuning or part-changeover distance. If you need less force, there is no smaller SEJ bore, but if you are stepping up, the 40 mm bore provides 528 N both ways at 0.5 MPa. If your process never requires end-position dialing, a fixed-stroke SED cylinder is a simpler choice. Remember that the adjustable cushion and stop screw decelerate the load but do not hold position on air loss; for fail-safe holding, use an external rod lock or BSED. As a direct ISO 15552 replacement, match the 32 mm bore, 30 mm stroke, PT1/8 port, and mounting hardware.
Quick checklist
The retract stroke can be mechanically dialed up to 30 mm using the back-rod stop screw. This provides an effective stroke range of 0-30 mm, allowing you to set the precise end position on the machine and lock it in place.
Because a rod exits both ends, the force is identical in both directions. This 32 mm bore cylinder outputs 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.