
The AirTAC SEJ Adjustable Cylinder SEJ32X30-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø32mm unit covers an effective stroke of 0–30mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X30-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30 mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions and yields an equal force of 345 N at 0.5 MPa. By turning the stop screw on the back rod, you can dial the retract end from 0 to 30 mm, allowing precise end-position tuning during machine commissioning without swapping hardware.
This extruded aluminum barrel unit includes a magnet for CMSE or DMSE sensors and field-adjustable air cushions at both ends. The adjustable cushion decelerates the load near the stroke end but does not lock the position; for fail-safe holding upon air loss, use an external rod lock. It runs at 30-800 mm/s with a PT1/8 port and M10x1.25 rod thread.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X30-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 30 mm |
| Adjustment window | 30 mm (0–30 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 0-30 mm retract position to fold varying carton flap heights precisely, using the 345 N both-way force to consistently close flaps without crushing the board.
Set a variable mechanical stop for electronics conveyor changeovers. The back-rod stop screw lets operators fine-tune the end position for different PCB widths during line commissioning.
Adjust the retract stroke on the machine to match varying vial heights perfectly. The equal both-way force ensures the dispensing head travels smoothly up and down without speed mismatch.
Confirm the 0 to 30 mm adjustment window covers your required stroke range before ordering. If 345 N at 0.5 MPa is insufficient, stepping up to the 40 mm bore provides 528 N both ways; if you need less force, there is no smaller SEJ bore, so the 32 mm is the baseline. If the stroke is fixed and never needs tuning, a standard SED double-rod cylinder is enough. For ISO 15552 replacement matching, verify the 32 mm bore, 0-30 mm window, PT1/8 port, and magnet option. Because the stroke is under 300 mm, side-load stress is minimal, but always ensure external guides support any lateral load.
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 30 mm window. The effective stroke range is 0 to 30 mm. You dial in the exact end position during commissioning and lock the screw in place.
Because it is a double-rod cylinder, force is equal in both directions. It outputs 345 N at 0.5 MPa, 483 N at 0.7 MPa, and reaches a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.