verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ32X300-100

The AirTAC SEJ Adjustable Cylinder SEJ32X300-100 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø32mm unit covers an effective stroke of 200–300mm without changing cylinders. Force is equal in both directions.

  • BoreØ32 mm
  • Nominal stroke300 mm
  • Adjust window100 mm
  • Effective stroke200–300 mm
  • Port sizePT1/8
  • CushionAdjustable, 27 mm
$89.29 $96.79Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ32 stroke, mounting and version on one page All SEJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ32X300-100

The AirTAC SEJ32X300-100 is a double-acting, double-rod profile cylinder built to ISO 15552 dimensional standards. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions at 345 N (0.5 MPa). The retract stroke is mechanically adjustable via a stop screw on the back rod over a 100 mm window, giving an effective stroke range of 200 to 300 mm.

This unit features an extruded aluminum barrel with no external tie rods, field-adjustable air cushions at both ends, and a PT1/8 port. Because the 300 mm stroke places leverage on the Ø12 mm rod, external guides are recommended to manage side load. This SKU has no magnet, so it does not support CMSE or DMSE position sensors.

Airtac SEJ Adjustable Cylinder SEJ32X300-100 Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ32X300-100
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ32 mm
Nominal stroke300 mm
Adjustment window100 mm (200–300 mm)
ConfigurationDouble rod, double acting
Port sizePT1/8
Rod threadM10×1.25
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø32mm)

PressureForce (both directions)
0.5 MPa346 N
0.7 MPa484 N
Max (@1.0 MPa)70 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ32X300-100

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
32Bore size in mm.
×300Nominal stroke length in mm.
-100Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ32X300-100 Is Used

tune

Dispenser Stroke Calibration

Dial the retract stop from 200 to 300 mm to precisely set adhesive bead length on packaging lines, using the 345 N both-way force to retract the applicator consistently.

swap_horiz

Variable Height Pin Stops

Adjust the mechanical end position on a conveyor diverter to handle different carton heights during changeovers without swapping out the entire cylinder hardware.

precision_manufacturing

Press Fit Trial Positioning

Commission a light-duty assembly press by tweaking the 100 mm retract window to find the exact seating depth for a 345 N insertion force before locking the stop screw.

Is the Airtac SEJ Adjustable Cylinder SEJ32X300-100 the Right Cylinder?

Choose this 32 mm bore if you need to fine-tune a retract position within a 200 to 300 mm range. It delivers 345 N both ways at 0.5 MPa; if you need less force, there is no smaller bore in the ISO 15552 SEJ range, but stepping up to the 40 mm bore yields 528 N. If your end position is fixed and never requires adjustment, a standard SED double-rod cylinder provides the same equal-force dynamics without the stop screw.

For a direct ISO 15552 replacement, match the 32 mm bore, 300 mm nominal stroke, 100 mm adjust window, PT1/8 port, and your mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Note that the adjustable air cushion decelerates the load near stroke end but does not hold position on air loss; fail-safe holding requires an external rod lock.

AirtacDistr lists every SEJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sej32-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (100mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 100mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ32X300-100 FAQ

A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 100 mm. The effective stroke range is 200 to 300 mm, which you set mechanically and lock in place during commissioning.

Because it is a double-rod cylinder, force is equal in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ32X300-100

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ32X300-100 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.