verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ32X35-10S

The AirTAC SEJ Adjustable Cylinder SEJ32X35-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø32mm unit covers an effective stroke of 25–35mm without changing cylinders. Force is equal in both directions.

  • BoreØ32 mm
  • Nominal stroke35 mm
  • Adjust window10 mm
  • Effective stroke25–35 mm
  • Port sizePT1/8
  • CushionAdjustable, 27 mm
$66.03 $73.53Save 10% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ32 stroke, mounting and version on one page All SEJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ32X35-10S

The AirTAC SEJ32X35-10S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10 mm adjustable stroke window, yielding an effective stroke range of 25-35 mm. A magnet is included for CMSE or DMSE sensor integration.

You dial in the retract end position using a stop screw on the back rod, then lock it after setting. This mechanism allows precise on-machine fine-tuning during commissioning without swapping hardware. The extruded aluminum barrel contains no external tie rods, and the field-adjustable air cushion at both ends decelerates the load near the stroke ends.

Airtac SEJ Adjustable Cylinder SEJ32X35-10S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ32X35-10S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ32 mm
Nominal stroke35 mm
Adjustment window10 mm (25–35 mm)
ConfigurationDouble rod, double acting
Port sizePT1/8
Rod threadM10×1.25
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø32mm)

PressureForce (both directions)
0.5 MPa346 N
0.7 MPa484 N
Max (@1.0 MPa)70 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ32X35-10S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
32Bore size in mm.
×35Nominal stroke length in mm.
-10Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ32X35-10S Is Used

tune

Dispenser Commissioning

Dial the 25-35 mm effective stroke to perfectly strike a fluid dispenser nozzle, using the equal 345 N both-way force for consistent contact.

swap_horiz

Part Height Changeover

Adjust the retract stop to accommodate varying incoming part heights on a conveyor without machining new brackets or changing the cylinder.

precision_manufacturing

Pick-and-Place Trial

Fine-tune the exact gripping position during a robotic pick-and-place setup, locking the back-rod stop screw once the optimal reach is found.

Is the Airtac SEJ Adjustable Cylinder SEJ32X35-10S the Right Cylinder?

Confirm the 10 mm adjustment window covers your required end-position variance. If 345 N at 0.5 MPa is excessive, a smaller-bore option is unavailable in this ISO 15552 family, so you must regulate pressure down. If you need more force, stepping up to the 40 mm bore yields 528 N both ways at 0.5 MPa. If your end position never changes, a fixed-stroke SED is sufficient. For fail-safe load holding on air loss, use an external rod lock, as the cushion and stop screw only set the mechanical end. This ISO 15552 cylinder replaces any standard 32 mm bore, 35 mm stroke unit with a PT1/8 port and matching mounting.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (10mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 10mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ32X35-10S FAQ

The 10 mm adjustment window lets you dial the retract end position to achieve an effective stroke ranging from 25 mm up to the nominal 35 mm.

Because the double-rod design yields equal force both ways, it delivers 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ32X35-10S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ32X35-10S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.