Airtac SE32 Standard Cylinder SE32X35
The AirTAC Airtac SE32 Standard Cylinder SE32X35 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 35mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke35 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X35
The AirTAC SE32X35 is a double-acting, single-rod ISO 15552 profile cylinder engineered for compact actuation. Delivering 402 N of push force at 0.5 MPa, it is built on an extruded aluminum barrel that omits external tie rods. This clean profile not only resists corrosion but allows flush mounting in tight machine envelopes. The 35 mm stroke is driven through a 12 mm rod and M10x1.25 thread, operating at speeds from 30 to 800 mm/s.
This specific SKU ships without a magnet, meaning it is not wired for CMSE or DMSE electronic position sensing out of the box. Deceleration at the 27 mm cushion length is handled by a field-adjustable pneumatic cushion at both ends, letting technicians dial out hard end-stop impacts via a set screw rather than relying on a fixed rubber bumper.
Airtac SE32 Standard Cylinder SE32X35 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X35 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X35
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X35 Is Used
PCB Drill Clamping
Ideal for small-stroke clamping arms on PCB drilling machines where 402 N of push force securely holds panels without distorting the delicate fiberglass substrate.
Lab Dispenser Gating
Provides precise 35 mm linear movement for actuating micro-valves on automated chemical laboratory liquid dispenser arrays.
Carton Flap Folding
Drives small folding mechanisms on compact carton sealing lines, using its 345 N retract force to tuck flaps smoothly at high cycle rates.
Is the Airtac SE32 Standard Cylinder SE32X35 the Right Cylinder?
Choosing this 32 mm bore depends on your force and spatial limits. If your application requires less force, stepping down is not possible as 32 mm is the smallest standard SE size. Conversely, if you need more power, stepping up to the 40 mm bore yields 628 N of push at 0.5 MPa. Because this is a standard double-acting cylinder, it will not hold a load in place if air pressure is lost or the valve is centered; the piston will drift. For position-holding needs, consider the BSE rod-lock variant. As a true ISO 15552 profile cylinder, it serves as a drop-in dimensional replacement for any standard 32 mm bore, 35 mm stroke ISO 15552 cylinder, utilizing the PT1/8 port and standard mounting accessories.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X35 FAQ
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At 0.7 MPa, the push force is 563 N. The maximum push force is 82 kgf when operating at the 1.0 MPa pressure limit.
Yes, the SE32X35 is dimensionally interchangeable per ISO 15552 standards. You can use it as a drop-in replacement for other ISO 15552 32mm bore profile cylinders, matching the PT1/8 port and M10x1.25 rod thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X35
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.