verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ32X40-10S

The AirTAC SEJ Adjustable Cylinder SEJ32X40-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø32mm unit covers an effective stroke of 30–40mm without changing cylinders. Force is equal in both directions.

  • BoreØ32 mm
  • Nominal stroke40 mm
  • Adjust window10 mm
  • Effective stroke30–40 mm
  • Port sizePT1/8
  • CushionAdjustable, 27 mm
$66.03 $73.53Save 10% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ32 stroke, mounting and version on one page All SEJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ32X40-10S

The AirTAC SEJ32X40-10S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so the drive force is equal in both directions at 345 N (0.5 MPa). You can dial the retract end from 30 to 40 mm to fine-tune machine stops.

This 32 mm bore unit includes a magnet for CMSE reed or DMSE electronic sensors. It uses adjustable air cushions at both ends to manage deceleration and has a PT1/8 port with an M10x1.25 rod thread.

Airtac SEJ Adjustable Cylinder SEJ32X40-10S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ32X40-10S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ32 mm
Nominal stroke40 mm
Adjustment window10 mm (30–40 mm)
ConfigurationDouble rod, double acting
Port sizePT1/8
Rod threadM10×1.25
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø32mm)

PressureForce (both directions)
0.5 MPa346 N
0.7 MPa484 N
Max (@1.0 MPa)70 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ32X40-10S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
32Bore size in mm.
×40Nominal stroke length in mm.
-10Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ32X40-10S Is Used

tune

Pick-and-Place Dial-In

Provides 483 N both ways at 0.7 MPa to transfer small electronic parts, while the 10 mm retract window lets you dial the placement depth during commissioning.

swap_horiz

Packaging Changeover

Adjusts the 30 to 40 mm stroke on the fly to handle varying carton flap heights without swapping out the entire cylinder assembly.

precision_manufacturing

Trial Spot Welding

Sets a precise electrode touch position on prototype sheet metal, using the 12 mm rod and adjustable end to test depths before final fixturing.

Is the Airtac SEJ Adjustable Cylinder SEJ32X40-10S the Right Cylinder?

This 10 mm adjustment window is ideal for dialing in precise end positions during commissioning without machining new stops. If you need less force, the adjacent 32 mm bore is the smallest standard size here, but if your load requires more thrust, stepping up to the 40 mm bore yields 528 N at 0.5 MPa both ways. If your stroke never varies after setup, a fixed-stroke SED cylinder is sufficient. The cushions only decelerate the load near stroke end; this cylinder does not hold position on air loss, so use an external rod lock for fail-safe holding. When replacing an ISO 15552 unit, match the 40 mm stroke, 10 mm window, PT1/8 port, and magnet option.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (10mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 10mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ32X40-10S FAQ

A stop screw on the back rod lets you dial the retract stroke over a 10 mm window, making the effective stroke 30 to 40 mm. You lock the screw after setting your exact end position.

As a double-rod cylinder, force is equal both ways: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ32X40-10S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ32X40-10S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.