Airtac SE32 Standard Cylinder SE32X40
The AirTAC Airtac SE32 Standard Cylinder SE32X40 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 40mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke40 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X40
The AirTAC SE32X40 is a double-acting single-rod ISO 15552 profile cylinder engineered for compact actuation. It delivers a 402 N push and 345 N pull at 0.5 MPa, making it well-suited for light-force routing and small fixture movements. The 32 mm bore utilizes a PT1/8 port and a 12 mm hard-chrome plated rod.
This unit features a square extruded aluminum barrel without external tie rods, yielding a flush mounting surface that resists corrosion and simplifies bracket alignment. Adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration via a set screw, protecting internal components from sharp impacts during high-speed 30-800 mm/s cycles.
Airtac SE32 Standard Cylinder SE32X40 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X40 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X40
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X40 Is Used
PCB Router Gating
Actuates small pneumatic gates to divert printed circuit boards on a conveyor with precise 40 mm travel and 402 N push force.
Small Part Ejection
Ejects lightweight plastic molded components from a tooling fixture using a compact 32 mm bore profile body.
Carton Flap Folding
Folds minor flaps on small secondary packaging cartons, utilizing the 27 mm cushion length to soften the stroke end.
Is the Airtac SE32 Standard Cylinder SE32X40 the Right Cylinder?
Choose this 32 mm bore when an application demands exactly 402 N of push force at 0.5 MPa within a tight 40 mm stroke envelope. If your routing or clamping task requires less energy, stepping down is not an option as 32 mm is the smallest standard SE size. Conversely, if you need substantially more force, the next size up is the 40 mm bore, which provides a 628 N push at 0.5 MPa. Because this specific SKU lacks the -S magnet, it cannot host CMSE or DMSE position sensors without a body swap. Furthermore, a plain SE cylinder relies on continuous air pressure to maintain its load; if pneumatic supply drops, the piston will drift, so safety-critical holding requires a BSE rod lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X40 FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At 0.7 MPa, the push force increases to 563 N, with a maximum push capacity of 82 kgf at 1.0 MPa. The operational speed ranges from 30-800 mm/s.
Yes, the SE32X40 is dimensionally interchangeable per ISO 15552 standards. Its standardized mounting interface and PT1/8 port allow it to serve as a drop-in replacement for other ISO 15552 profile cylinders, sharing standard mounting accessories.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.