
The AirTAC SEJ Adjustable Cylinder SEJ32X40-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø32mm unit covers an effective stroke of 20–40mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X40-20S is a double-acting, double-rod ISO 15552 profile cylinder with a 20mm retract adjustment window, yielding an effective stroke range of 20-40mm. A rod exits both ends, ensuring the annulus area remains identical for equal force and speed in both directions. You get exactly 345 N each way at 0.5 MPa.
Turning the stop screw on the back rod lets you dial in the retract end position precisely during commissioning without changing mounting hardware. The barrel uses an extruded aluminum profile with no external tie rods, and the included -S magnet works directly with CMSE reed and DMSE electronic sensors for position feedback.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X40-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 40 mm |
| Adjustment window | 20 mm (20–40 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×40 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 20-40mm retract stop when switching a packaging machine between different carton heights, using the 345N both-way force to push folding flaps securely.
Set precise end-of-stroke limits on a small parts assembly press without machining new spacers, adjusting the stop screw to find the optimal 20mm clamping window.
Adjust the retract distance on a conveyor sorting gate to match varying product widths, relying on equal push and pull forces for consistent divergence.
Verify the 20mm adjustment window covers your required end-position variance; if you need less fine-tuning or a fixed stop, the SED double-rod cylinder is sufficient. Sizing both ways: step down is not applicable for 32mm, while the next bore up is 40mm delivering 528 N both ways at 0.5 MPa. For ISO 15552 replacement matching, confirm the 20mm window, 40mm nominal stroke, PT1/8 port, and magnet option. The adjustable air cushion at both ends decelerates the load near stroke end but does not hold position on air loss; for fail-safe holding, use an external rod lock or BSED.
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 20mm window. This means your effective stroke range is 20-40mm, which you set and lock during commissioning without changing hardware.
Because a rod exits both ends, force is equal in both directions. It delivers 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.