
The AirTAC SEJ Adjustable Cylinder SEJ32X40-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø32mm unit covers an effective stroke of 10–40mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X40-30S is a double-acting, double-rod ISO 15552 profile cylinder with an adjustable stroke. A rod exits both ends, yielding identical annulus areas and an equal force of 345 N in both directions at 0.5 MPa. You can dial the retract end up to 30 mm via a back-rod stop screw, setting an effective stroke range of 10 to 40 mm.
This extruded aluminum barrel omits external tie rods and includes field-adjustable air cushions at both ends to decelerate the load near stroke end. The integrated -S magnet supports CMSE reed and DMSE electronic sensors for position detection, while the M10x1.25 rod end threads handle mounting attachments.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X40-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 40 mm |
| Adjustment window | 30 mm (10–40 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×40 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Fine-tune the 10 to 40 mm retract stroke on an automated gripper to match varying part widths, using the 345 N both-way force for stable clamping.
Dial in the stop screw during product changeover on a packaging line, shifting the end position without physically remounting the cylinder hardware.
Use the adjustable window to test spot-facing depths on soft jigs, relying on the equal push and pull forces to maintain tool alignment.
The 30 mm adjustment window is ideal for dialing in a precise 10 to 40 mm end position during machine commissioning. If you need less force, step down to a bore 25 unit (confirm force from datasheet); if you need more, step up to the bore 40 SEJ, which provides 528 N both ways at 0.5 MPa. A fixed-stroke SED is sufficient if your stop position never changes. For direct replacement, match the 32 mm bore, 40 mm nominal stroke, PT1/8 port, and the 30 mm window. The adjustable air cushion only decelerates the load; it is not a lock, so an external rod lock is required for fail-safe holding.
Quick checklist
The back-rod stop screw lets you adjust the retract stroke up to 30 mm. This gives an effective stroke range of 10 to 40 mm, which you lock in place after setting the exact end position.
Because the rod exits both ends, the force is identical in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.