
The AirTAC SEJ Adjustable Cylinder SEJ32X450-50 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø32mm unit covers an effective stroke of 400–450mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X450-50 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm adjustable stroke window. A rod exits both ends, yielding identical annular areas so the cylinder develops equal force in both directions at 345 N each way at 0.5 MPa. By turning the stop screw on the back rod, you can mechanically shorten the retract stroke, giving an effective range of 400 to 450 mm to perfectly dial in a machine end position.
This extruded aluminum barrel profile cylinder runs at 30-800 mm/s with a PT1/8 port and a 12 mm rod. The rear rod extension can carry a cam or flag for external limit switches, while adjustable air cushions at both ends decelerate the load near stroke end. Note that this SKU lacks a magnet, so it cannot host CMSE or DMSE position sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X450-50 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 450 mm |
| Adjustment window | 50 mm (400–450 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×450 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Delivering 345 N each way at 0.5 MPa, this cylinder dials in a 400-450 mm press stroke to seat delicate electronics connectors without crushing the housing.
Adjust the retract end by up to 50 mm to accommodate varying carton heights on a packaging line, shifting the 483 N @0.7 MPa stop position for rapid format changes.
Use the extended back rod to mount a cam and set a precise 425 mm diverting stroke on a conveyor, leveraging the equal both-way force for consistent indexing.
This 50 mm window lets you fine-tune the retract end from 400 to 450 mm without swapping hardware, ideal for commissioning a long-travel assembly station. If you need less force, the smaller 32 mm bore is the floor, but stepping up to a 40 mm bore yields 528 N each way at 0.5 MPa. If 345 N is excessive, a fixed-stroke SED might suffice if the end stop never needs field adjustment.
Because the stroke is 450 mm, external guides are recommended to prevent rod side-load deflection. The adjustable air cushion is not a lock; for fail-safe position holding on air loss, specify a BSED or an external rod lock. When replacing an ISO 15552 unit, match the 32 mm bore, 450 mm stroke, 50 mm window, PT1/8 port, and mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke over a 50 mm window, giving an effective stroke range of 400 to 450 mm. You dial in the exact end position during commissioning and lock it in place.
Because the rod exits both ends, force is equal in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.