
The AirTAC SEJ Adjustable Cylinder SEJ32X50-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø32mm unit covers an effective stroke of 40–50mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X50-10S is a double-acting, double-rod ISO 15552 profile cylinder with a 50 mm nominal stroke. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions: 345 N at 0.5 MPa and 483 N at 0.7 MPa. A stop screw on the back rod lets you mechanically shorten the retract stroke by up to 10 mm, providing an effective working range of 40-50 mm for precise end-position tuning during machine commissioning.
Because the rear rod extends through the back plate, overall length is longer than a single-rod SE cylinder. The extruded aluminum barrel has no external tie rods, ensuring clean ISO 15552 dimensional interchangeability. Standard field-adjustable air cushions at both ends decelerate the 12 mm rod near stroke end, and the built-in magnet (-S) supports CMSE reed or DMSE electronic sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X50-10S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 50 mm |
| Adjustment window | 10 mm (40–50 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dialing in the 40-50 mm retract stop on a pick-and-place head during commissioning, using the 345 N both-way force to grip and lift small electronic components precisely.
Adjusting the stroke down by 10 mm when a packaging line switches to a shorter carton format, avoiding hardware swaps while maintaining the 483 N retract force at 0.7 MPa.
Testing clamping pressure and contact points on a laboratory jig, using the double-rod equal force and the stop screw to find the exact 40-50 mm clamping depth without reprogramming.
This 32 mm bore delivers 345 N both ways at 0.5 MPa. If your load requires less force, there is no smaller SEJ bore, so confirm 345 N covers your payload plus friction. If you need more thrust, step up to the 40 mm bore, which provides 528 N both ways at 0.5 MPa. If your end position never varies, a fixed-stroke SED double-rod cylinder is sufficient and avoids the extra length.
The 10 mm adjustment window is ideal for dialing in a precise stop. Note that the air cushion and stop screw decelerate and set the mechanical end, but a plain SEJ does not hold position on air loss; for fail-safe holding, use a BSED or an external rod lock. To match this ISO 15552 cylinder for replacement, verify the 50 mm stroke, 10 mm window, PT1/8 port, and your mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Quick checklist
The -10 suffix indicates a 10 mm adjustment window. A stop screw on the back rod lets you mechanically shorten the retract stroke, giving an effective stroke range of 40 mm up to the full 50 mm. You set the exact end position and lock it in place on the machine.
Because a rod exits both ends, the force is identical extend and retract. It delivers 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.