
The AirTAC SEJ Adjustable Cylinder SEJ32X50-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø32mm unit covers an effective stroke of 30–50mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X50-20S is a double-acting, double-rod ISO 15552 profile cylinder with a 20mm adjustable stroke window, letting you dial the retract end from 30mm up to 50mm. A rod exits both ends, meaning the annulus area is identical in both directions. This yields an equal force of 345N each way at 0.5MPa (483N at 0.7MPa).
You adjust the end position via a stop screw on the back rod, locking it after setting the exact machine stop. The extruded aluminum barrel has no external tie rods, and the included -S magnet works with CMSE reed and DMSE electronic sensors for position feedback. Adjustable air cushions at both ends decelerate the load near stroke end.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X50-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 50 mm |
| Adjustment window | 20 mm (30–50 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 20mm window to set a 30-50mm precise dispensing head height, utilizing the equal 345N both-way force for clean contact and retract.
Swap part heights on a packaging line by adjusting the back-rod stop screw, matching the new carton size without replacing hardware.
This 32mm bore provides 345N both ways at 0.5MPa. If you need less force, step down is not an option as 32mm is the smallest, but if your application requires more push or pull, step up to the 40mm bore for 528N each way. The 20mm adjustment window is ideal for fine-tuning a 30-50mm end position without machining new hard stops. If your stroke is fixed and never changes, a standard SED double-rod cylinder is enough. The adjustable air cushion decelerates the load near stroke end but is not a lock; a plain SEJ does not hold position on air loss, so use an external rod lock for fail-safe holding. This cylinder uses a PT1/8 port and M10x1.25 rod thread.
Quick checklist
The 20mm adjustment window lets you mechanically dial the retract stroke from 30mm up to the nominal 50mm. You set the exact end position using the stop screw on the back rod, then lock it in place.
Because the rod exits both ends, force is equal in both directions: 345N at 0.5 MPa, 483N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.