
The AirTAC SEJ Adjustable Cylinder SEJ32X50-30 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø32mm unit covers an effective stroke of 20–50mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X50-30 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30 mm adjustable stroke window, allowing the retract position to be dialed in for an effective stroke range of 20-50 mm. A rod exits both ends, ensuring the annulus area remains identical in both directions for equal force and speed. This cylinder delivers 345 N of thrust and pull each way at 0.5 MPa, with a maximum capacity of 70 kgf at 1.0 MPa.
A mechanical stop screw on the back rod alters the stroke length, which you lock in place after setting the exact end position during machine commissioning. The extruded aluminum barrel includes field-adjustable air cushions at both ends to decelerate the load near stroke end, and this specific SKU lacks a magnet, meaning it cannot host CMSE or DMSE position sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X50-30 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 50 mm |
| Adjustment window | 30 mm (20–50 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 20-50 mm stroke to set the exact probe extension on a liquid packaging line, leveraging the 345 N both-way force to lift the probe reliably.
Swap the mechanical stop to accommodate different carton heights without swapping cylinders, locking the back-rod screw for repeatable 50 mm maximum travel.
Fine-tune the retracted end position during light-duty bearing seating, using the equal push and pull forces to maintain balanced clamping pressure.
This 32 mm bore model fits applications needing 345 N both-way force at 0.5 MPa; if you need less force, the smaller bore options lack the ISO 15552 profile footprint, but if you require more thrust, stepping up to the 40 mm bore yields 528 N both ways at 0.5 MPa. The 30 mm adjustment window is excellent for dialing in precise end-stops without machining new hardware, but if your stroke never changes, a fixed-stroke SED cylinder offers a shorter overall length. Remember that the adjustable cushion and stop screw decelerate the load but do not hold position on air loss; for fail-safe holding, use an external rod lock. When replacing an ISO 15552 cylinder, verify the 50 mm stroke, 20-50 mm window, PT1/8 port, and mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Quick checklist
The 30 mm adjustment window lets you dial the retract stroke from a minimum of 20 mm up to the nominal 50 mm, so you can fine-tune the end position directly on the machine without changing hardware.
Because the rod exits both ends, force is identical in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.