
The AirTAC SEJ Adjustable Cylinder SEJ32X50-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø32mm unit covers an effective stroke of 20–50mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X50-30S is a double-acting, double-rod ISO 15552 profile cylinder with a mechanically adjustable retract stroke. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions at 345 N each way at 0.5 MPa. A stop screw on the back rod lets you dial the retract end over a 30 mm window, providing an effective stroke range of 20-50 mm for precise machine commissioning.
This 32 mm bore unit includes a standard magnet (-S) for position sensing and uses adjustable air cushions at both ends to decelerate the load near stroke end. The extruded aluminum barrel contains no external tie rods, and the rear rod can carry a cam or flag while helping guide against rotation. It operates at 30-800 mm/s with a PT1/8 port and a Ø12 mm rod threaded M10x1.25.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X50-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 50 mm |
| Adjustment window | 30 mm (20–50 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 30 mm retract window to set precise 20-50 mm probe heights on test fixtures. The 345 N both-way force ensures consistent contact pressure on delicate boards.
Adjust the mechanical stop on the fly when switching between different carton depths. The double-rod design maintains equal push and pull force for reliable flap folding.
Fine-tune the exact retract distance for adhesive dispensing nozzles during commissioning. The -S magnet works with DMSE sensors to confirm the adjusted end position.
Verify the 30 mm adjustment window covers your positioning range; this model dials the retract end from 20 mm up to 50 mm. If you need less force, a smaller bore is unavailable in this ISO 15552 series, but if you need more thrust, stepping up to the 40 mm bore provides 528 N both ways at 0.5 MPa. For fixed end positions that never require changeover, a standard SED double-rod cylinder is sufficient. Note that the air cushion and stop screw only set the mechanical end and decelerate the load; they do not hold position on air loss, so an external rod lock is required for fail-safe holding. Because the 50 mm stroke is short, side loading is minimal, but external guides should still align with the M10x1.25 rod thread to prevent binding. When matching an ISO 15552 replacement, confirm the 32 mm bore, 20-50 mm effective range, PT1/8 port, and mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
Quick checklist
A stop screw on the rear rod mechanically limits the retract stroke. You can adjust the end position over a 30 mm window, giving an effective stroke range of 20-50 mm. Lock the screw after setting your exact position.
Because it is a double-rod cylinder, the force is identical in both directions. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.