
The AirTAC SEJ Adjustable Cylinder SEJ32X50-40 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø32mm unit covers an effective stroke of 10–50mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X50-40 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 40mm adjustable stroke window. A rear stop screw lets you dial the retract end from 10mm up to the 50mm nominal stroke, perfect for fine-tuning end positions on the machine without swapping hardware. Because a rod exits both ends, the annulus area is identical in both directions, yielding an equal force of 345 N each way at 0.5 MPa.
This 32mm bore unit uses a PT1/8 port and a Ø12mm rod with an M10x1.25 thread. It features field-adjustable air cushions at both ends to decelerate the load near the stroke extremes. Note that this specific SKU lacks a magnet, so CMSE or DMSE position sensors cannot be used without modifying the configuration.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X50-40 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 50 mm |
| Adjustment window | 40 mm (10–50 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Nominal stroke length in mm. |
| -40 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Delivering 483 N both ways at 0.7 MPa, this cylinder lets operators fine-tune the 10-50mm retract stop to perfectly match pick-and-place gripper depth during machine commissioning.
Use the 40mm stroke adjustment to rapidly shift the end position when a packaging line switches to a different carton size, avoiding the need to physically remount the cylinder.
Ideal for test fixtures where the exact retraction distance is unknown; the rear stop screw allows precise mechanical positioning of a 32mm rod end without programming changes.
The 40mm adjustment window is ideal for applications needing a precise end-position within a 10 to 50mm range. If you need less force, stepping down is not an option as 32mm is the smallest ISO 15552 bore; if you require significantly more thrust, the next bore up is 40mm, which provides 528 N both ways at 0.5 MPa. If your stroke length is permanently fixed and requires no future dialing, a standard SED double-rod cylinder offers a simpler setup. Remember that the adjustable cushion and stop screw decelerate the load and set the mechanical end, but this cylinder will not hold position on air loss; for fail-safe holding, use an external rod lock or a BSED series cylinder. As a dimensionally interchangeable ISO 15552 component, it matches standard mounting footprints including Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
The cylinder has a 40mm adjustment window on the back rod. You can mechanically dial the retract stroke from a minimum effective length of 10mm up to the full nominal stroke of 50mm, then lock the stop screw in place.
Because the rod exits both ends, force is equal in both directions. It generates 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.