
The AirTAC SEJ Adjustable Cylinder SEJ32X50-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø32mm unit covers an effective stroke of 10–50mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X50-40S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 40mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so output force stays equal in both directions at 345 N at 0.5 MPa. The retract end uses a mechanical stop screw on the back rod, letting you dial the effective stroke down from the 50mm nominal to a 10mm minimum.
This unit includes a magnet for CMSE reed or DMSE electronic sensors. It carries a PT1/8 port, a 12mm rod with an M10x1.25 thread, and field-adjustable air cushions at both ends to manage deceleration over the 27mm cushion length. The extruded aluminum barrel ensures ISO 15552 dimensional interchangeability without external tie rods.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X50-40S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 50 mm |
| Adjustment window | 40 mm (10–50 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Nominal stroke length in mm. |
| -40 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 10-50mm retract stop to precisely set pick height for varying board thicknesses. The equal 345N both-way force securely lifts components without drift.
Quickly adjust the end position during carton size changeovers. The 40mm window allows operators to tune the stroke on the machine without swapping hardware.
Fine-tune the retract distance for exact adhesive bead placement. The back-rod stop screw locks down the 10-50mm range after commissioning.
Verify the 40mm adjustment window covers your required positioning range, providing a 10-50mm effective stroke. If you need less force, the adjacent bore down is 32mm (this is the smallest size), but stepping up to the 40mm bore yields 528 N at 0.5 MPa both ways. If your machine never requires end-position tuning, a fixed-stroke SED cylinder provides the same double-rod output more simply.
For direct ISO 15552 replacement, match the 50mm nominal stroke, 40mm window, PT1/8 port, and your mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2. Note that the adjustable cushion only decelerates the load near stroke end; a plain SEJ does not hold position on air loss, so specify an external rod lock for fail-safe holding.
Quick checklist
A stop screw on the rear rod mechanically limits the retract stroke. For this SEJ32X50-40S, you can adjust the effective stroke anywhere from 10mm up to the 50mm nominal. You set the exact end position on the machine, then lock the screw.
Because it is a double-rod cylinder, force is equal in both directions. It outputs 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.