
The AirTAC SEJ Adjustable Cylinder SEJ32X60-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø32mm unit covers an effective stroke of 10–60mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X60-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions at 345 N (0.5 MPa). You can dial the retract end from 10 mm up to the nominal 60 mm, giving you a wide mechanical range to fine-tune end positions without machining new parts.
This extruded aluminum profile cylinder includes a magnet for position sensing and adjustable air cushions at both ends. The rear stop screw sets the mechanical end and decelerates the load near stroke end, but it is not a fail-safe lock. With a PT1/8 port and M10x1.25 rod thread, it provides direct ISO 15552 dimensional interchangeability.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X60-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 60 mm |
| Adjustment window | 50 mm (10–60 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Fine-tune the 10 to 60 mm retract position during CNC machine commissioning to place raw blanks accurately against a stop.
Adjust the mechanical end position on the fly for trial product ejection, using the equal both-way force to consistently push parts.
Confirm this 50 mm adjustment window covers your required positioning range, letting you hit any effective stroke between 10 and 60 mm on the machine. The 32 mm bore delivers 345 N both ways at 0.5 MPa; if you need less force, no smaller SEJ bore exists, but if your load demands more, stepping up to the 40 mm bore yields 528 N both ways at 0.5 MPa. If your application never requires stroke changes, a fixed-stroke SED saves length and cost.
For exact ISO 15552 replacement matching, verify the 60 mm nominal stroke, 50 mm window, PT1/8 port, and your required mounting style from the SEJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the stroke is under 300 mm, external side-load guides are less critical, but ensure the 12 mm rod handles any radial load. The standard -S magnet pairs directly with CMSE reed and DMSE electronic sensors.
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke by up to 50 mm. The effective stroke range is 10 to 60 mm. You set the exact end position on the machine, then lock the screw in place.
Because it is a double-rod cylinder, the force is identical in both directions. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.