
The AirTAC SEJ Adjustable Cylinder SEJ32X75-30 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø32mm unit covers an effective stroke of 45–75mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X75-30 is a double-acting, double-rod ISO 15552 profile cylinder with a 30 mm adjustable stroke window, yielding an effective retract range of 45 to 75 mm. A stop screw on the back rod lets you dial in the exact end position during machine commissioning without swapping hardware.
This extruded aluminum barrel unit features field-adjustable air cushions at both ends to fine-tune end-of-stroke deceleration. It uses a PT1/8 port, a 12 mm rod with an M10x1.25 thread, and operates at speeds from 30 to 800 mm/s. Note that this specific SKU lacks a magnet, so it will not support CMSE or DMSE position sensors without modification.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X75-30 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 75 mm |
| Adjustment window | 30 mm (45–75 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 45 to 75 mm down-stroke during commissioning of an electronics assembly handler, using the 345 N both-way force to press pins into boards without crushing components.
Quickly adjust the mechanical stop to accommodate different carton heights on a packaging line, relying on the equal 483 N retract and extend force at 0.7 MPa to fold flaps securely.
Set a precise variable stop for a small pneumatic clamp fixture, using the 30 mm window to trial different datum positions before locking the back-rod screw for the cut.
Verify the 30 mm adjustment window covers your positioning needs; the retract end can be set anywhere from 45 mm up to the full 75 mm stroke. If you need less force, the adjacent 32 mm bore is the smallest available SEJ size. If your application requires higher thrust, stepping up to the 40 mm bore provides 528 N both ways at 0.5 MPa. If your end position never changes, a fixed-stroke SED cylinder provides the same double-rod action without the adjustment hardware. For replacing an existing ISO 15552 unit, match the 32 mm bore, 75 mm stroke, PT1/8 port, and your required mounting from the Basic, FA, LB, TC, FTC, TCM1, or TCM2 set. Remember that the adjustable cushion and stop screw only set the mechanical end and decelerate near stroke end; they do not hold position on air loss. For fail-safe holding, use an external rod lock.
Quick checklist
The 30 mm adjustment window allows you to mechanically shorten the retract stroke from the nominal 75 mm down to 45 mm. You set the exact end position using a stop screw on the back rod, then lock it in place.
Because the rod exits both ends, the force is identical in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.