verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ32X75-75

The AirTAC SEJ Adjustable Cylinder SEJ32X75-75 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 75mm window, so this Ø32mm unit covers an effective stroke of 0–75mm without changing cylinders. Force is equal in both directions.

  • BoreØ32 mm
  • Nominal stroke75 mm
  • Adjust window75 mm
  • Effective stroke0–75 mm
  • Port sizePT1/8
  • CushionAdjustable, 27 mm
$65.83 $73.33Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SEJ32 stroke, mounting and version on one page All SEJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SEJ Adjustable Cylinder SEJ32X75-75

The AirTAC SEJ32X75-75 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 75 mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions. This provides an equal drive force of 345 N each way at 0.5 MPa, ensuring perfectly balanced push and pull operations.

You can dial the retract end position from 0 to 75 mm using the mechanical stop screw on the back rod. Once set, you lock the screw to secure the exact end position on the machine. The extruded aluminum barrel omits external tie rods for a clean profile, and this specific SKU ships without a magnet, so it does not support position sensing.

Airtac SEJ Adjustable Cylinder SEJ32X75-75 Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ32X75-75
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ32 mm
Nominal stroke75 mm
Adjustment window75 mm (0–75 mm)
ConfigurationDouble rod, double acting
Port sizePT1/8
Rod threadM10×1.25
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 75mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø32mm)

PressureForce (both directions)
0.5 MPa346 N
0.7 MPa484 N
Max (@1.0 MPa)70 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ32X75-75

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
32Bore size in mm.
×75Nominal stroke length in mm.
-75Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ32X75-75 Is Used

tune

Gripper Gap Calibration

Delivers 345 N both ways to test robotic gripper jaws. Dial the retract stroke from 0 to 75 mm to set exact jaw gaps for varying part sizes during commissioning.

swap_horiz

Packaging Changeover

Switch a packaging machine between different carton heights. The 75 mm stop-screw window allows rapid mechanical repositioning of the sealing head without swapping hardware.

science

Lab Dispense Positioning

Probe and dispense fluids accurately. Equal force both directions prevents drift, while the 75 mm adjustment window lets operators find the exact touchpoint without reprogramming the PLC.

Is the Airtac SEJ Adjustable Cylinder SEJ32X75-75 the Right Cylinder?

This 32 mm bore suits lighter tasks requiring precise positioning. If you need less force, there is no smaller SEJ bore, so you must regulate pressure down. If you need more power, stepping up to the 40 mm bore yields 528 N both ways at 0.5 MPa. Because the nominal stroke is 75 mm, you stay well under the 300 mm threshold where external side-load guides become critical.

The 75 mm adjustment window covers a wide effective range of 0-75 mm, ideal for changeovers. If your application never requires stroke tuning, a fixed-stroke SED saves complexity. Remember that the adjustable air cushion at both ends only decelerates the load near stroke end; it is not a mechanical lock. A plain SEJ will not hold position on air loss, so use an external rod lock for fail-safe holding. Ensure your ISO 15552 replacement matches the PT1/8 port, M10x1.25 rod thread, and chosen mounting from Basic, FA, LB, TC, FTC, TCM1, or TCM2.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (75mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 75mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ32X75-75 FAQ

The retract stroke is adjustable via a stop screw on the back rod over a 75 mm window. The effective stroke range is 0 to 75 mm. You simply dial the end position to the exact spot required and lock the screw.

Because the rod exits both ends, force is identical in both directions. It generates 345 N at 0.5 MPa, 483 N at 0.7 MPa, and reaches a maximum of 70 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ32X75-75

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SEJ32X75-75 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.