
The AirTAC SEJ Adjustable Cylinder SEJ32X80-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø32mm unit covers an effective stroke of 70–80mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X80-10S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10mm adjustable stroke window. A rod exits both ends, yielding an equal force of 345 N in both directions at 0.5 MPa. You can mechanically dial the retract end from 70 to 80 mm using the back-rod stop screw, allowing precise on-machine end-position tuning without swapping hardware.
This extruded aluminum barrel design includes field-adjustable air cushions at both ends to manage deceleration. Equipped with a standard magnet (-S), it supports CMSE reed and DMSE electronic sensors for position feedback. The PT1/8 port and M10x1.25 rod thread match standard 32mm bore ISO 15552 dimensions.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X80-10S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 80 mm |
| Adjustment window | 10 mm (70–80 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 10mm retract window to perfectly align a printing head over varying substrate thicknesses, utilizing the equal 345 N both-way force for stable pressing.
Fine-tune the 70-80mm stroke on a circuit board drilling station to match exact depth requirements during commissioning without changing out the entire cylinder assembly.
Adjust the mechanical stop on the fly when a packaging line switches to a different product carton size, using the 32mm bore's 483 N at 0.7 MPa to push varying widths.
Confirm the 10mm adjustment window covers your exact 70-80mm positioning range. If you need less force, a smaller bore is unavailable in this standard range, but if you require more power, stepping up to the 40mm bore provides 528 N both ways at 0.5 MPa. If your application never requires stroke changes, a fixed-stroke SED cylinder simplifies the setup.
For direct ISO 15552 replacement, verify your bore, 80mm stroke, PT1/8 port, and magnet requirement. Note that this SEJ uses a subset of mountings (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB and CA styles. The adjustable cushion decelerates the load near stroke end but does not hold position on air loss; use an external rod lock for fail-safe holding.
Quick checklist
The 10mm adjustment window allows you to mechanically dial the retract stroke from 70mm up to 80mm. You set the exact end position with the back-rod stop screw and lock it in place.
Because the rod exits both ends, the force is identical in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.