Airtac SE32 Standard Cylinder SE32X80
The AirTAC Airtac SE32 Standard Cylinder SE32X80 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø32mm bore and 80mm stroke, PT1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke80 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac SE32 Standard Cylinder SE32X80
The AirTAC SE32X80 is a double-acting single-rod ISO 15552 profile cylinder engineered for compact automation. It delivers 402 N of push force at 0.5 MPa and features a 12 mm hard-chrome piston rod with an M10x1.25 thread. The square extruded aluminum barrel eliminates external tie rods, yielding a flush-mounting body that resists corrosion and fits neatly into tight machine envelopes.
Field-adjustable pneumatic cushioning at both ends allows you to tune the 27 mm cushion length to soften hard end-stops during high-speed cycling. This specific SKU lacks the built-in magnet option, so it operates without position sensing unless external switches are mounted. It functions purely as a controlled actuator, decelerating the piston near stroke end rather than locking the load.
Airtac SE32 Standard Cylinder SE32X80 Technical Specifications
| Model | Airtac SE32 Standard Cylinder SE32X80 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE32 Standard Cylinder SE32X80
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE32 Standard Cylinder SE32X80 Is Used
PCB Depaneling Saw
Provides the 402 N push force needed to drive a circular blade through scored printed circuit boards, utilizing the 80 mm stroke to feed material safely.
Small Carton Flap Folder
Extends and retracts at speeds up to 800 mm/s to fold light cardboard flaps on compact packaging lines, relying on adjustable cushioning to prevent impact damage.
Lab Sample Dispenser
Actuates a 12 mm rod to push a dispensing nozzle 80 mm downward into vials, benefiting from the clean, no-tie-rod profile that prevents dust accumulation.
Is the Airtac SE32 Standard Cylinder SE32X80 the Right Cylinder?
Choose this 32 mm bore when your application requires 402 N of push force at 0.5 MPa. If you need less force, step down to the 25 mm bore (not standard in SE, confirm from datasheet), or step up to the 40 mm bore which provides 628 N of push at 0.5 MPa for heavier payloads. Because this is an 80 mm stroke, side-load on the rod bearing is minimal, but always verify the load center of mass. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct drop-in replacement for other ISO 15552 cylinders, matching the PT1/8 port and standardized mounting interface without altering your existing fixture plates.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE32 Standard Cylinder SE32X80 FAQ
This double-acting cylinder provides 402 N push and 345 N pull at 0.5 MPa, 563 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It operates at speeds ranging from 30 to 800 mm/s.
No, the SE32X80 does not hold position when air is lost or the valve is centered; the piston will drift. The adjustable air cushion at both ends only decelerates the piston near stroke end and does not function as a locking brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE32 Standard Cylinder SE32X80
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.