
The AirTAC SEJ Adjustable Cylinder SEJ32X80-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø32mm unit covers an effective stroke of 40–80mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X80-40S is a double-acting, double-rod ISO 15552 profile cylinder with a mechanically adjustable retract stroke. A stop screw on the back rod lets you dial the retract end up to 40 mm, providing an effective stroke range of 40-80 mm for precise on-machine positioning. Because a rod exits both ends, the annulus area is identical in both directions, yielding equal force of 345 N each way at 0.5 MPa.
This extruded aluminum profile cylinder omits external tie rods and features field-adjustable air cushions at both ends to decelerate the load near stroke end. Equipped with a standard magnet (-S), it supports CMSE reed and DMSE electronic sensors for position feedback. The 12 mm rod uses an M10x1.25 end thread, and the PT1/8 port ensures compact pneumatic integration.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X80-40S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 80 mm |
| Adjustment window | 40 mm (40–80 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Nominal stroke length in mm. |
| -40 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 40 mm retract window to match varying PCB thicknesses on a pick-and-place gantry, leveraging the 345 N both-way force to lift components without drift.
Adjust the effective stroke between 40 and 80 mm to accommodate different carton depths on a packaging line, avoiding hardware swaps during product format changes.
Fine-tune the exact extend distance of an adhesive dispensing probe against a variable stop, using the equal bidirectional force to maintain consistent contact pressure.
Verify the 40 mm adjustment window covers your required end-position variance. If you need less fine-tune range, the fixed-stroke SED provides a simpler alternative without the back-rod screw. For sizing both ways, stepping down to a smaller bore is not an option for this series, but stepping up to the 40 mm bore raises the both-way force to 528 N at 0.5 MPa. Note that a plain SEJ does not hold position on air loss; the cushion and stop screw only set the mechanical end and decelerate, so specify an external rod lock for fail-safe holding. Ensure your ISO 15552 replacement matches the 80 mm stroke, 40 mm window, PT1/8 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 40 mm window. This makes the effective stroke adjustable from 40 mm up to the nominal 80 mm, which you lock in place after setting the exact end position.
Because it is a double-rod cylinder, the force is identical in both directions. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.