
The AirTAC SEJ Adjustable Cylinder SEJ40X100-10 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø40mm unit covers an effective stroke of 90–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X100-10 is a double-acting, double-rod ISO 15552 profile cylinder with a 10 mm adjustable stroke window, yielding an effective travel range of 90 to 100 mm. A rod exits both ends, generating identical output force in both directions—delivering 528 N each way at 0.5 MPa. This symmetry is ideal for mechanisms requiring balanced push and pull dynamics.
You dial in the exact retract end-position using a mechanical stop screw on the back rod, then lock it down. The extruded aluminum barrel omits external tie rods for a clean profile, and field-adjustable air cushions at both ends absorb kinetic energy near stroke end. This SKU lacks a magnet, so it does not support position sensing.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X100-10 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 10 mm (90–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 90-100 mm retract to perfectly seat gripper jaws on varying part widths, using the equal 528 N both-way force to clamp and release securely.
Set a precise mechanical stop for a light metal forming press, tweaking the 10 mm window on the machine to match material thickness without swapping hardware.
Verify the 10 mm adjustment window covers your fine-tuning range; if you need a broader dial-in, step up to a 20 mm window. For force sizing, the 32 mm bore provides 345 N at 0.5 MPa, while stepping up to the 63 mm bore yields 1402 N. If your end-position never changes after commissioning, a fixed-stroke SED offers the same double-rod symmetry.
Remember that the adjustable stop screw and air cushions decelerate the load but do not hold position on air loss; apply an external rod lock for fail-safe holding. For an exact ISO 15552 replacement, match the 100 mm stroke, 10 mm window, PT1/4 port, and your required mounting from the SEJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
The retract end features a stop screw with a 10 mm adjustment window. The effective stroke can be dialed from 90 mm up to the full 100 mm, allowing you to fine-tune the end position directly on the machine.
Because the rod exits both ends, force is identical in both directions: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.