
The AirTAC SEJ Adjustable Cylinder SEJ40X100-20 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø40mm unit covers an effective stroke of 80–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X100-20 is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions at 528 N (0.5 MPa). A stop screw on the back rod provides a 20 mm adjustment window, allowing you to dial in the retract end position precisely. This yields an effective stroke range of 80 to 100 mm without changing hardware.
It features a 40 mm bore, a Ø16 mm rod, and an M12x1.25 rod-end thread. Standard PT1/4 ports supply air, while field-adjustable air cushions at both ends decelerate the load near stroke ends. This SKU has no magnet, so CMSE or DMSE position sensors cannot be used here.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X100-20 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 20 mm (80–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 80-100mm retract stop during setup. The 528N both-way force handles light clamping without needing hardware changes.
Adjust the back-rod stop screw to accommodate different part heights on a conveyor line, shifting the end position within the 20mm window.
This 20 mm window is ideal for fine-tuning a machine's end position during commissioning or matching a variable stop. If you need less force, the 32 mm bore provides 345 N at 0.5 MPa; if you need more, step up to the 50 mm bore which provides 825 N both ways at 0.5 MPa. If your stroke never varies, a fixed-stroke SED is sufficient.
For direct ISO 15552 replacement, match the 40 mm bore, 100 mm stroke, 20 mm window, PT1/4 port, and your mounting choice. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Remember: the air cushion and stop screw decelerate and set the mechanical end, but they do not hold position on air loss. For fail-safe holding, use an external rod lock.
Quick checklist
The SEJ40X100-20 has a 20 mm adjustment window. You can dial the retract stroke from 80 mm up to 100 mm to fine-tune the end position on the machine.
Because the rod exits both ends, force is equal in both directions: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.