
The AirTAC SEJ Adjustable Cylinder SEJ40X100-30 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø40mm unit covers an effective stroke of 70–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X100-30 is a double-acting, double-rod ISO 15552 profile cylinder. A stop screw on the back rod lets you dial the retract end over a 30 mm window, providing an effective stroke range of 70-100 mm for precise positioning.
This extruded aluminum barrel omits external tie rods and includes field-adjustable air cushions at both ends to decelerate loads smoothly. It uses a PT1/4 port, a Ø16 mm rod, and an M12x1.25 rod-end thread. Because this SKU lacks a magnet, it cannot host CMSE or DMSE position sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X100-30 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 30 mm (70–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 70-100 mm effective stroke to perfectly position a 528 N dispensing head over varying container heights during line changeover.
Adjust the retract end on the fly to act as a precise mechanical stop for different product lengths on a packaging conveyor.
Use the 30 mm window to trial exact clamping depth on machined parts without swapping out the entire cylinder hardware.
This 30 mm adjustment window is ideal for fine-tuning end positions during machine commissioning or matching a variable stop. If your application only requires a fixed stroke, a standard SED double-rod cylinder is sufficient. If you need fail-safe load holding on air loss, note that this cylinder does not lock; consider a BSED or an external rod lock.
For sizing, the neighboring bore 32 provides 345 N at 0.5 MPa, while stepping up to bore 50 offers 825 N. The 100 mm stroke is below the 300 mm threshold requiring external side-load guides, but the dual rods inherently resist rotation for guided loads.
Quick checklist
The retract end features a stop screw with a 30 mm adjustment window. The effective stroke can be dialed down from 100 mm to 70 mm, allowing you to set the exact end position on the machine and lock it in place.
Because it is a double-rod cylinder, the force is equal in both directions: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.