verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ40X100-40

The AirTAC SEJ Adjustable Cylinder SEJ40X100-40 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø40mm unit covers an effective stroke of 60–100mm without changing cylinders. Force is equal in both directions.

  • BoreØ40 mm
  • Nominal stroke100 mm
  • Adjust window40 mm
  • Effective stroke60–100 mm
  • Port sizePT1/4
  • CushionAdjustable, 30 mm
$75.59 $83.09Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SEJ40 stroke, mounting and version on one page All SEJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SEJ Adjustable Cylinder SEJ40X100-40

The AirTAC SEJ40X100-40 is a double-acting, double-rod ISO 15552 profile cylinder offering a mechanically adjustable retract stroke. A stop screw on the rear rod lets you dial in the end position over a 40 mm window, yielding an effective stroke range of 60 to 100 mm without swapping hardware.

This unit features a 16 mm rod with an M12x1.25 end thread and PT1/4 ports. Adjustable air cushions at both ends decelerate the load near stroke limits, while the extruded aluminum barrel ensures ISO 15552 dimensional interchangeability. Note this SKU lacks a magnet, so it does not support CMSE or DMSE position sensors.

Airtac SEJ Adjustable Cylinder SEJ40X100-40 Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ40X100-40
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ40 mm
Nominal stroke100 mm
Adjustment window40 mm (60–100 mm)
ConfigurationDouble rod, double acting
Port sizePT1/4
Rod threadM12×1.25
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø40mm)

PressureForce (both directions)
0.5 MPa528 N
0.7 MPa739 N
Max (@1.0 MPa)108 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ40X100-40

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
40Bore size in mm.
×100Nominal stroke length in mm.
-40Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ40X100-40 Is Used

swap_horiz

Packaging Changeover

Adjust the retract end from 60 to 100 mm when switching carton sizes, letting one cylinder handle multiple box flap folding positions seamlessly.

science

Lab Dispense Positioning

Set precise trial stop points for fluid nozzles, leveraging the 16 mm rod and M12x1.25 thread to mount custom dispense heads for varying vial heights.

Is the Airtac SEJ Adjustable Cylinder SEJ40X100-40 the Right Cylinder?

Verify the 40 mm adjustment window covers your positioning needs, allowing precise end-point tuning from 60 to 100 mm. For force sizing, compare this 40 mm bore (528 N both ways at 0.5 MPa) against the smaller 32 mm bore (345 N) or the larger 50 mm bore (825 N) to match your load. If your stroke never changes, a fixed-stroke SED saves length and cost. Remember, the stop screw and air cushions only set the mechanical end and decelerate the load; they do not hold position on air loss, so add an external rod lock for fail-safe holding.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (40mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 40mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ40X100-40 FAQ

The SEJ40X100-40 has a 40 mm adjustment window via a stop screw on the back rod. This allows the effective retract stroke to be mechanically fine-tuned anywhere from 60 mm up to the nominal 100 mm.

Because it is a double-rod cylinder, force is equal in both directions. It provides 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ40X100-40

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SEJ40X100-40 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.