
The AirTAC SEJ Adjustable Cylinder SEJ40X100-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø40mm unit covers an effective stroke of 60–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X100-40S is a double-acting, double-rod ISO 15552 profile cylinder with a 40mm adjustable stroke window, yielding an effective 60-100mm travel. A rod exits both ends, delivering identical extend and retract thrust of 528 N at 0.5 MPa.
You dial in the exact retract end-position using a stop screw on the back rod, then lock it. The extruded aluminum barrel omits external tie rods, and the -S magnet enables CMSE or DMSE electronic position sensing.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X100-40S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 40 mm (60–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -40 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 40mm window to match varying part heights during machine changeover, using the 528 N both-way force to shift machining fixtures.
Adjust the retract stop on the fly to index different carton sizes on a packaging line without swapping hardware.
Trim the 60-100mm effective stroke during setup to perfectly mate a 739 N transfer arm with a downstream pickup point.
Verify this 40mm bore provides the needed thrust; if less is required, step down to the 32mm bore delivering 345 N, or step up to the 50mm bore for 825 N at 0.5 MPa. If your travel distance never varies, a fixed-stroke SED saves complexity.
This cylinder will not hold position on air loss; the adjustable air cushion only decelerates the load near stroke end. For direct ISO 15552 replacement, match the 100mm stroke, 40mm window, PT1/4 port, and mounting choice. With a 100mm stroke, ensure external guides manage side loads.
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 40mm. For this SEJ40X100-40S model, the effective travel range is 60-100mm. You set the exact end position and lock it in place.
Because it is a double-rod cylinder, the force is equal in both directions: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.