
The AirTAC SEJ Adjustable Cylinder SEJ40X100-50 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø40mm unit covers an effective stroke of 50–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X100-50 is a double-acting, double-rod ISO 15552 profile cylinder with a 50 mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions. This delivers an equal output force of 528 N each way at 0.5 MPa, ensuring perfectly balanced push and pull dynamics.
By turning the mechanical stop screw on the back rod, you can shorten the retract stroke anywhere within the 50 to 100 mm effective range. This allows you to fine-tune the exact end position directly on the machine during commissioning. The extruded aluminum barrel has no external tie rods, and the field-adjustable air cushion at both ends decelerates the load near the stroke end without acting as a lock.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X100-50 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 50 mm (50–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 50 to 100 mm stroke range to accommodate different blank heights on a forming press, utilizing the 528 N both-way force to push and pull the tooling without rebalancing pressure.
Use the back-rod stop screw to precision-set the exact retract end position during initial machine commissioning, locking the 40 mm bore cylinder exactly at the required 75 mm stop.
Adjust the stroke on the fly to shift conveyor diverter arms between various package widths, relying on the equal push/pull force to maintain smooth actuation across the range.
This 40 mm bore provides 528 N both ways at 0.5 MPa. If your load requires less force, the 32 mm bore offers 345 N; if you need more, step up to the 50 mm bore which provides 825 N both ways. The 50 mm adjustment window is ideal for applications needing a wide variable-stop range or frequent part height changeovers. If your end position is fixed and never changes, a standard SED double-rod cylinder is sufficient. For replacing an ISO 15552 unit, match the 100 mm stroke, 50 mm window, PT1/4 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Note that the air cushion and stop screw only set the mechanical end and decelerate the load; they do not hold position on air loss. For fail-safe holding, use an external rod lock.
Quick checklist
A stop screw on the rear rod mechanically limits the retract stroke. You can dial the retract end up to 50 mm, giving an effective stroke range of 50 to 100 mm. Once set, you lock the screw in place.
Because it is a double-rod cylinder, the force is equal in both directions. It generates 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.