
The AirTAC SEJ Adjustable Cylinder SEJ40X100-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø40mm unit covers an effective stroke of 50–100mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X100-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm adjustable stroke window, allowing the effective retract stroke to be fine-tuned anywhere from 50 to 100 mm. A rod exits both ends, ensuring the annulus area remains identical for equal force and speed in both directions, delivering 528 N each way at 0.5 MPa.
Because the retract end is set via a mechanical stop screw on the back rod, you can lock the exact end-position on the machine without changing hardware. This extruded aluminum barrel profile cylinder includes a magnet for CMSE (reed) and DMSE (electronic) sensors, and uses field-adjustable air cushions at both ends to decelerate the load near the stroke ends.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X100-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 100 mm |
| Adjustment window | 50 mm (50–100 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 50-100mm effective stroke on an assembly press to apply exactly 528 N of equal both-way force at 0.5 MPa for seating delicate bearings without overshooting.
Adjust the retract stop on the fly to accommodate different carton heights, using the 50mm window to match the pressing position without swapping out cylinder hardware.
Fine-tune the clamping end-point during machine commissioning, locking the back-rod stop screw precisely against a workpiece stop for repeatable 739 N holding force at 0.7 MPa.
Confirm the 50 mm adjustment window covers your required end-position range; if you need less fine-tuning, a fixed-stroke SED cylinder is sufficient. For sizing both ways, the next bore down (32 mm) yields 345 N at 0.5 MPa, while the next bore up (50 mm) yields 825 N at 0.5 MPa. A plain SEJ does not hold position on air loss; the stop screw and air cushions only set the mechanical end and decelerate the load, so use an external rod lock for fail-safe holding. When matching an ISO 15552 replacement, verify the 40 mm bore, 100 mm nominal stroke, PT1/4 port, and your required mounting option (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
Quick checklist
The 50 mm adjustment window allows the retract stroke to be dialed in from a minimum effective stroke of 50 mm up to the full nominal stroke of 100 mm. You set the mechanical stop screw on the back rod and lock it once the desired end-position is reached.
Because the rod exits both ends, force is identical in both directions: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.