
The AirTAC SEJ Adjustable Cylinder SEJ40X125-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø40mm unit covers an effective stroke of 85–125mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X125-40S is a double-acting, double-rod ISO 15552 profile cylinder with a 40mm bore and 125mm nominal stroke. A rod exits both ends, yielding identical annulus areas so thrust matches in both directions at 528 N each way at 0.5 MPa. An integrated magnet supports position sensing.
A stop screw on the back rod provides a 40mm adjustable stroke window, letting you dial the retract end from 85mm up to 125mm. This eliminates machining custom spacers when commissioning end-of-stroke positions. The extruded aluminum barrel contains no external tie rods, and adjustable air cushions at both ends decelerate the 30-800 mm/s motion.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X125-40S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 125 mm |
| Adjustment window | 40 mm (85–125 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×125 | Nominal stroke length in mm. |
| -40 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 85-125mm retract stop to quickly adapt packaging press tooling for different carton heights, utilizing the 528 N both-way force.
Fine-tune the exact end-of-stroke contact point during robotic parts insertion without fabricating new shims, locking the back rod once set.
Sweep through the 40mm adjustment window on a test rig to find the optimal feeding distance for dispensing adhesives before finalizing the mechanical setup.
Verify the 40mm window covers your target range; here you can set the retract stop anywhere from 85 to 125mm. If your process needs less force, the 32mm bore delivers 345 N both ways at 0.5 MPa. If pushing heavier jigs, step up to the 50mm bore for 825 N both ways. If your end position never changes, a fixed-stroke SED avoids the adjustment hardware. For fail-safe load holding on air loss, use a BSED or external rod lock, as the cushion and stop screw only set the mechanical end. Match ISO 15552 replacements by bore, stroke, port PT1/4, and mounting (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
The 40mm stop-screw window lets you mechanically shorten the retract stroke from 125mm down to 85mm. You set the exact end position on the machine and lock it, covering a range without changing cylinder hardware.
Because the rod exits both ends, force is identical extend and retract: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.