
The AirTAC SEJ Adjustable Cylinder SEJ40X130-20 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø40mm unit covers an effective stroke of 110–130mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X130-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions, yielding an equal force of 528 N each way at 0.5 MPa. You can dial the retract end from 110 to 130 mm.
A stop screw on the back rod lets you mechanically fine-tune the end position during machine commissioning. The extruded aluminum barrel omits external tie rods, and adjustable air cushions at both ends decelerate the 16 mm rod near stroke limits. This SKU lacks a magnet, so CMSE or DMSE position sensors cannot be installed.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X130-20 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 130 mm |
| Adjustment window | 20 mm (110–130 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×130 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 110-130 mm press stroke on-site to match material thickness, utilizing the 739 N both-way force at 0.7 MPa for consistent stamping.
Adjust the retract stop to accommodate different carton heights without swapping hardware, relying on the 16 mm rod for stable actuation.
Fine-tune the end position during assembly machine commissioning to seat bearings precisely without over-traveling the mechanism.
Verify the 20 mm adjustment window covers your target positioning range. If you need less force, the adjacent 32 mm bore provides 345 N both ways at 0.5 MPa; if you need more, step up to the 50 mm bore for 825 N. If the exact 130 mm stroke never varies, a fixed-stroke SED cylinder is sufficient. Remember, the stop screw and air cushions only set the mechanical end and decelerate motion; they do not hold position on air loss. For fail-safe holding, use an external rod lock. This ISO 15552 unit interchanges dimensionally on bore, stroke, PT1/4 port, and mounting options like Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke by up to 20 mm. The effective stroke range is 110 to 130 mm, which you lock in place after finding the exact end position.
Because it is a double-rod cylinder, the force is identical in both directions: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.