
The AirTAC SE40 Standard Cylinder SE40X130 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø40mm bore and 130mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE40X130 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 628 N of push force at 0.5 MPa and 879 N at 0.7 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush within tight machine envelopes. A field-adjustable pneumatic cushion at both ends allows you to tune end-of-stroke deceleration via a screw, softening hard impacts during high-speed 30-800 mm/s cycling.
Because this specific SKU lacks the built-in magnet option, it does not support direct AirTAC CMSE or DMSE position sensing without modification. It remains a robust choice for straightforward actuation, featuring a 16 mm hard-chrome rod and a PT1/4 porting interface.
| Model | Airtac SE40 Standard Cylinder SE40X130 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 40 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Provides the 628 N push at 0.5 MPa required to snap corrugated cartons into shape during high-speed packaging line cycling.
Uses the 130 mm stroke to push heavy pallets onto parallel conveyor lanes, benefiting from the flush no-tie-rod profile to avoid snagging.
Acts as an adjustable physical stop for CNC infeed conveyors, utilizing the field-adjustable air cushions to soften the impact of arriving workpieces.
Stepping down to the SE32 bore reduces your 0.5 MPa push output to 402 N, whereas moving up to the SE50 bore increases it to 982 N. This 40 mm bore sits perfectly in the middle for medium-duty tasks. Keep in mind that a plain SE cylinder relies on live air pressure to maintain its position; if pneumatic supply is lost or the valve centers, the piston will drift. For applications requiring true load holding without continuous air, consider the BSE rod-lock variant.
When retrofitting an existing machine, this SE40X130 is dimensionally interchangeable per ISO 15552 standards, accepting standard mounting hardware like FA front flanges or LB foot brackets. The 130 mm stroke is well below the 1200 mm maximum standard stroke, but if your mechanism involves heavy off-center loads, always incorporate an external guide rail to prevent rod-bearing bending and premature seal wear.
Quick checklist
The SE40X130 generates a push force of 628 N and a pull force of 528 N at 0.5 MPa. At 0.7 MPa, the push force is 879 N, with a maximum push capacity of 128 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE40X130 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint and rod thread (M12x1.25) of other ISO 15552 profile cylinders, allowing for a direct replacement.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.