verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ40X150-20

The AirTAC SEJ Adjustable Cylinder SEJ40X150-20 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø40mm unit covers an effective stroke of 130–150mm without changing cylinders. Force is equal in both directions.

  • BoreØ40 mm
  • Nominal stroke150 mm
  • Adjust window20 mm
  • Effective stroke130–150 mm
  • Port sizePT1/4
  • CushionAdjustable, 30 mm
$81.18 $88.68Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SEJ40 stroke, mounting and version on one page All SEJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SEJ Adjustable Cylinder SEJ40X150-20

The AirTAC SEJ40X150-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so the output force is perfectly balanced at 528 N each way at 0.5 MPa. You can dial the retract end-position from 130 to 150 mm via a back-rod stop screw, locking it precisely during machine commissioning.

This extruded aluminum barrel design includes field-adjustable air cushions at both ends to tame kinetic energy near stroke extremes. It runs at 30-800 mm/s with a PT1/4 port and a 16 mm rod. The rear extension can also mount a cam or flag, and the unit omits FB, CA, CB, and CR brackets in favor of Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.

Airtac SEJ Adjustable Cylinder SEJ40X150-20 Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ40X150-20
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ40 mm
Nominal stroke150 mm
Adjustment window20 mm (130–150 mm)
ConfigurationDouble rod, double acting
Port sizePT1/4
Rod threadM12×1.25
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø40mm)

PressureForce (both directions)
0.5 MPa528 N
0.7 MPa739 N
Max (@1.0 MPa)108 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ40X150-20

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
40Bore size in mm.
×150Nominal stroke length in mm.
-20Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ40X150-20 Is Used

tune

Packaging Flap Fine-Tuning

Dialing the 130-150 mm retract stop on a packaging line lets operators perfectly time flap folding mechanisms using the 739 N retract force at 0.7 MPa without swapping hardware.

swap_horiz

Product Changeover

Adjusting the back-rod stop screw accommodates varying carton heights on a conveyor, shifting the end position within the 20 mm window to match new formats instantly.

precision_manufacturing

Trial Positioning Jigs

Engineers use the equal 528 N both-way force and the adjustable end-stop to test sensor alignment and gripping distances on new machining jigs before finalizing fixed lengths.

Is the Airtac SEJ Adjustable Cylinder SEJ40X150-20 the Right Cylinder?

Verify the 20 mm adjustment window covers your required end-position variance, providing a 130-150 mm effective stroke range. If your application needs less force, the 32 mm bore delivers 345 N at 0.5 MPa; if you need more clamping power, step up to the 50 mm bore for 825 N. A fixed-stroke SED is sufficient if you never need to fine-tune the retract distance. Note that the stop screw and air cushions decelerate the load but do not hold position on air loss; a BSED or external rod lock is required for fail-safe holding. For a direct ISO 15552 replacement, match the 40 mm bore, 150 mm nominal stroke, PT thread, and mounting hardware.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (20mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 20mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ40X150-20 FAQ

A mechanical stop screw on the rear rod lets you shorten the retract stroke by up to 20 mm. This provides an effective stroke range of 130 to 150 mm, which you lock down once the ideal machine end-position is set.

Because the rod exits both ends, the force is identical in both directions: 528 N at 0.5 MPa, 739 N at 0.7 MPa, with a maximum of 108 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ40X150-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SEJ40X150-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.