
The AirTAC SEJ Adjustable Cylinder SEJ40X150-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø40mm unit covers an effective stroke of 130–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X150-20S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 20mm adjustable stroke window. A rod exits both ends, meaning the annular area is identical in both directions, yielding an equal 528 N of thrust and pull at 0.5 MPa. By turning the stop screw on the back rod, you can mechanically dial the retract end from 130 mm up to 150 mm to perfectly match a machine stop. The -S magnet enables position tracking with CMSE or DMSE sensors.
Dimensionally interchangeable per ISO 15552, this extruded aluminum barrel design omits external tie rods. The field-adjustable air cushions at both ends decelerate the load near the stroke ends, while the PT1/4 port and M12x1.25 rod thread integrate smoothly into existing setups.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X150-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 20 mm (130–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 130-150 mm clamp depth on a small pneumatic press, using the 528 N both-way force to seat components without over-compressing them.
Adjust the retract stop on the fly when switching carton sizes, utilizing the 20 mm window to hit varying flap-folding positions precisely.
Prototype a new part feed location by micro-adjusting the end stop, locking the back rod screw once the optimal 140 mm end point is found.
Verify your end-position target falls inside the 130-150 mm effective range. If you need less force, step down to the 32 mm bore, which provides 345 N both ways at 0.5 MPa. If your application requires more thrust, step up to the 50 mm bore, delivering 825 N both ways at 0.5 MPa. If the exact 150 mm stroke is fixed and never requires fine-tuning, a fixed-stroke SED cylinder is a simpler, shorter alternative. For direct ISO 15552 replacement, match the 40 mm bore, 150 mm stroke, PT1/4 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). At 150 mm stroke, ensure external guides support any side load. Remember, this cylinder does not hold position on air loss; for fail-safe holding, specify a BSED or an external rod lock.
Quick checklist
The SEJ40X150-20S has a stop screw on the back rod that lets you mechanically shorten the retract stroke by up to 20 mm. The effective stroke range is 130 to 150 mm. You set the exact end position during commissioning and lock the screw in place.
Because it is a double-rod cylinder, the force is identical in both directions: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.