
The AirTAC SEJ Adjustable Cylinder SEJ40X150-30 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø40mm unit covers an effective stroke of 120–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X150-30 is a double-acting, double-rod profile cylinder dimensionally interchangeable per ISO 15552. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions at 528 N each way at 0.5 MPa. An integrated stop screw on the back rod lets you mechanically dial the retract end up to 30 mm, providing an effective stroke range of 120-150 mm without swapping hardware.
This extruded aluminum barrel unit features field-adjustable air cushions at both ends to decelerate the load near stroke end. It uses a PT1/4 port, a 16 mm rod with an M12x1.25 thread, and operates at speeds of 30-800 mm/s. Note this SKU lacks a magnet, so it will not trigger CMSE or DMSE position sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X150-30 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 30 mm (120–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 30 mm retract window to match varying carton heights on a packaging line, using the 739 N both-way force at 0.7 MPa to consistently tuck flaps.
Fine-tune the 120-150 mm effective stroke on a spot welder to set the exact electrode contact gap without reprogramming the machine controller.
Adjust the reject arm end position on a conveyor to deflect different product sizes precisely, relying on the equal extend and retract forces for smooth motion.
Verify the 30 mm adjustment window safely covers your required end-position variance. If you need less force, stepping down to the 32 mm bore provides 345 N both ways at 0.5 MPa; if you need more thrust, stepping up to the 50 mm bore yields 825 N both ways. If the end position never changes, a fixed-stroke SED saves complexity. Remember this cylinder does not hold position on air loss; the cushion and stop screw only set the mechanical end and decelerate, they are not a brake. For fail-safe holding, use an external rod lock. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke by up to 30 mm. This gives an effective stroke range of 120-150 mm, allowing you to fine-tune the end position directly on the machine and lock it in place.
Because it is a double-rod cylinder, the force is identical in both directions. It provides 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.