
The AirTAC SEJ Adjustable Cylinder SEJ40X150-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø40mm unit covers an effective stroke of 120–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X150-30S is a double-acting, double-rod ISO 15552 profile cylinder with a 30 mm adjustable stroke window. A rod exits both ends, meaning the annular area is identical in both directions. This yields an equal force of 528 N each way at 0.5 MPa (739 N at 0.7 MPa). By turning the stop screw on the back rod, you can dial the retract end in over a 120 to 150 mm effective range to match a machine stop exactly.
This extruded aluminum barrel design omits external tie rods for a clean profile. It includes field-adjustable air cushions at both ends to decelerate the load near stroke end, and the built-in magnet (-S) supports CMSE reed and DMSE electronic sensors. The PT1/4 port and M12x1.25 rod thread match standard ISO 15552 mounting dimensions.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X150-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 30 mm (120–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 120-150 mm retract end to precisely strike a packaging flap folder, using the 528 N both-way force to securely push the carton without crushing it.
Adjust the stroke on the fly to eject different height aluminum castings from a conveyor, ensuring the rod tip clears tall and short parts equally.
Set the exact 120-150 mm end stop during a press changeover to trial a new die height, relying on the equal extend and retract force for smooth operation.
This 40 mm bore fits between the 32 mm (345 N both ways at 0.5 MPa) and 50 mm (825 N both ways at 0.5 MPa) options, giving you a mid-range force for moderate payloads. The 30 mm adjustment window is ideal if you need to fine-tune an end position during commissioning without machining new hardware; if your stroke never varies, a fixed-stroke SED is sufficient. For matching an existing ISO 15552 cylinder, verify the 150 mm nominal stroke, 120-150 mm effective range, PT1/4 port, and your mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Note that the adjustable cushion decelerates the load but does not hold position on air loss; for fail-safe holding, use an external rod lock or BSED.
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 30 mm. The effective stroke range is 120 to 150 mm, which you set and lock in place during commissioning.
Because the rod exits both ends, force is equal in both directions: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.