
The AirTAC SEJ Adjustable Cylinder SEJ40X150-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø40mm unit covers an effective stroke of 100–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X150-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so the output force is equal in both directions at 528 N each way at 0.5 MPa. You can dial the retract end from 100 mm up to the 150 mm nominal stroke to perfectly dial in a machine stop without swapping hardware.
This extruded aluminum barrel unit includes a magnet for position sensing with CMSE reed or DMSE electronic sensors. It carries a PT1/4 port, a 16 mm rod with an M12x1.25 thread, and field-adjustable air cushions at both ends to manage deceleration over the 30 mm cushion length.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X150-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 50 mm (100–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 50 mm retract window to match varying part heights during press die changeover, using the equal 739 N both-way force at 0.7 MPa to consistently seat tooling.
Fine-tune the 100-150 mm stop position on a packaging conveyor to handle different carton sizes without swapping the cylinder hardware.
Trial different retract positions on a prototype pick-and-place rig, locking the back-rod stop screw precisely where the 528 N transfer force is needed.
Verify the 50 mm adjustment window covers your required positioning range, letting you fine-tune the retract stroke from 100 to 150 mm on the machine. If you need less force, stepping down to the 32 mm bore yields 345 N each way at 0.5 MPa, while stepping up to the 50 mm bore provides 825 N both ways at 0.5 MPa. If you do not need variable end-positioning, a fixed-stroke SED cylinder is sufficient.
The adjustable stop screw and air cushions only set the mechanical end and decelerate the load near stroke end; they do not hold position on air loss. For fail-safe holding, use an external rod lock. This unit is dimensionally interchangeable per ISO 15552, so match the bore, 150 mm stroke, 50 mm window, PT1/4 port, and your mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2) for a direct replacement.
Quick checklist
The 50 mm stop screw window lets you mechanically dial the retract stroke from a 100 mm effective length up to the 150 mm nominal stroke, which is ideal for commissioning and fine-tuning end positions.
Because the rod exits both ends, the force is identical in both directions: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.