verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ40X160-10

The AirTAC SEJ Adjustable Cylinder SEJ40X160-10 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø40mm unit covers an effective stroke of 150–160mm without changing cylinders. Force is equal in both directions.

  • BoreØ40 mm
  • Nominal stroke160 mm
  • Adjust window10 mm
  • Effective stroke150–160 mm
  • Port sizePT1/4
  • CushionAdjustable, 30 mm
$83.97 $91.47Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SEJ40 stroke, mounting and version on one page All SEJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SEJ Adjustable Cylinder SEJ40X160-10

The AirTAC SEJ40X160-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10mm adjustable retract stroke window, yielding an effective travel range of 150 to 160mm. A rod exits both ends, ensuring the annular area remains identical in both directions. This translates to an equal output force of 528 N each way at 0.5 MPa.

You dial in the exact end-position by turning the stop screw on the back rod and locking it down, which is ideal for fine-tuning a mechanical stop directly on the machine. Built to ISO 15552 and VDMA 24562 dimensional standards with an extruded aluminum barrel, it features field-adjustable air cushions at both ends and a PT1/4 port. This SKU lacks a magnet, so it will not support CMSE or DMSE position sensors.

Airtac SEJ Adjustable Cylinder SEJ40X160-10 Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ40X160-10
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ40 mm
Nominal stroke160 mm
Adjustment window10 mm (150–160 mm)
ConfigurationDouble rod, double acting
Port sizePT1/4
Rod threadM12×1.25
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø40mm)

PressureForce (both directions)
0.5 MPa528 N
0.7 MPa739 N
Max (@1.0 MPa)108 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ40X160-10

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
40Bore size in mm.
×160Nominal stroke length in mm.
-10Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ40X160-10 Is Used

precision_manufacturing

Press Feed Stop Tuning

Dial the 10mm retract window to perfectly align a sheet metal feed stop on a stamping press, using the 528 N both-way force to consistently halt material.

swap_horiz

Product Changeover Positioning

Quickly shift the retract end by up to 10mm to accommodate different packaging carton heights on a filling line without swapping out cylinder hardware.

science

Prototype Probe Placement

Fine-tune the exact 150-160mm extension of a testing probe against a new circuit board, leveraging the equal push and pull forces for stable contact.

Is the Airtac SEJ Adjustable Cylinder SEJ40X160-10 the Right Cylinder?

Confirm the 10mm adjustment window safely covers your required end-position variance, letting you set the retract stroke anywhere between 150 and 160mm. For sizing both ways, the adjacent 32mm bore yields 345 N at 0.5 MPa, while stepping up to the 63mm bore provides 1402 N at 0.5 MPa. If your stroke length never varies after commissioning, a fixed-stroke SED cylinder provides the same double-rod stability without the adjustment hardware. As a plain SEJ, this cylinder does not hold position on air loss; the adjustable cushion and stop screw only decelerate the piston and set the mechanical end, so point to a BSED or an external rod lock for fail-safe holding. Because the nominal stroke is 160mm, external guides are recommended if side loads are present.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (10mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 10mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ40X160-10 FAQ

The retract stroke has a 10mm adjustment window, meaning you can mechanically dial the effective stroke down from the nominal 160mm to a minimum of 150mm. You set the exact end-position via a stop screw on the back rod and lock it in place.

Because a rod exits both ends, the force is identical in both directions. It generates 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ40X160-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SEJ40X160-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.