
The AirTAC SEJ Adjustable Cylinder SEJ40X160-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø40mm unit covers an effective stroke of 150–160mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X160-10S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10mm adjustable stroke window. By turning the stop screw on the back rod, you dial the retract stroke from 150 mm up to 160 mm to match a precise machine stop.
This unit includes a magnet for CMSE or DMSE sensors and adjustable air cushions at both ends. The extruded aluminum barrel omits external tie rods, and the rear rod can carry a cam or flag. It operates at 30-800 mm/s with a PT1/4 port and a 16 mm rod thread (M12x1.25).
| Model | Airtac SEJ Adjustable Cylinder SEJ40X160-10S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 160 mm |
| Adjustment window | 10 mm (150–160 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×160 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 10 mm retract window to match varying part heights during robotic gripper changeover, using the 739 N both-way force at 0.7 MPa to securely pull and seat tooling plates.
Fine-tune the 150-160 mm end position during light-duty bearing press fits, ensuring the double-rod equal force does not overshoot the assembly depth during commissioning.
Adjust the retract stop on the fly to align packaging web edges, leveraging the 30-800 mm/s speed and equal annulus area for consistent tensioning both ways.
Verify your end-position tolerance fits within the 150-160 mm effective range. If you need less force, step down to a 32 mm bore (345 N both ways at 0.5 MPa); if your load requires more, step up to a 50 mm bore (825 N both ways at 0.5 MPa). A fixed-stroke SED is sufficient if you never need to dial in the end stop. For ISO 15552 replacement matching, confirm the 160 mm stroke, 10 mm window, PT1/4 port, and magnet option. Since the stroke is 160 mm, external guides are recommended to manage side loads on the 16 mm rod. The stop screw and air cushions only set the mechanical end and decelerate near stroke end; they do not hold position on air loss, so use an external rod lock for fail-safe holding.
Quick checklist
The stop screw on the back rod allows you to adjust the retract stroke over a 10 mm window. The effective stroke range is 150 mm to 160 mm, which you can fine-tune directly on the machine and lock in place.
Because a rod exits both ends, the force is identical in both directions. It provides 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.