
The AirTAC SEJ Adjustable Cylinder SEJ40X200-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø40mm unit covers an effective stroke of 100–200mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X200-100S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100mm adjustable stroke window. You can dial the retract end from 100mm up to 200mm, allowing precise end-position tuning without swapping hardware. A rod exits both ends, yielding identical annulus areas and equal force of 528 N each way at 0.5 MPa.
This extruded aluminum barrel design omits external tie rods and includes a built-in magnet for CMSE or DMSE sensors. The retract stop screw mechanism lets you lock the exact position on the machine, while adjustable air cushions at both ends manage deceleration over the 30mm cushion length.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X200-100S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 200 mm |
| Adjustment window | 100 mm (100–200 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 100-200mm effective stroke to match varying box sizes during production changeovers, utilizing the 528 N both-way force to consistently push flaps without re-mounting hardware.
Fine-tune the retract end position on a conveyor routing system.
Test and set exact engagement depths during new equipment commissioning. The 100mm adjustment window lets operators find the perfect pressing position for delicate components before locking the screw.
Confirm the 100mm adjustment window covers your required end-position range. If you need less force, stepping down to the 32mm bore yields 345 N both ways at 0.5 MPa. If your application requires more thrust, the 63mm bore provides 1402 N each way. A fixed-stroke SED cylinder is sufficient if you never need to alter the end position after commissioning.
Remember that the adjustable cushion and stop screw decelerate the load and set the mechanical end, but they do not hold position on air loss. For fail-safe holding, specify an external rod lock. Ensure your ISO 15552 replacement matches the 40mm bore, 200mm nominal stroke, 100mm window, PT1/4 port, and magnet option.
Quick checklist
A stop screw on the back rod mechanically shortens the retract stroke over a 100mm window. You can dial the effective stroke from 100mm up to the full 200mm, then lock the screw to hold that exact end position.
Because the rod exits both ends, force is identical in both directions. It provides 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.