
The AirTAC SEJ Adjustable Cylinder SEJ40X200-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø40mm unit covers an effective stroke of 190–200mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ40X200-10S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions at 528 N each way at 0.5 MPa. You can dial the retract end from 190mm to 200mm effective stroke.
A stop screw on the back rod lets you mechanically fine-tune the end position during machine commissioning without swapping hardware. The extruded aluminum barrel has no external tie rods, and the included -S magnet supports CMSE reed and DMSE electronic sensors for precise positioning feedback.
| Model | Airtac SEJ Adjustable Cylinder SEJ40X200-10S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Nominal stroke | 200 mm |
| Adjustment window | 10 mm (190–200 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/4 |
| Rod thread | M12×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 528 N |
| 0.7 MPa | 739 N |
| Max (@1.0 MPa) | 108 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×200 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 190-200mm clamping reach on a press fixture, using the 528N both-way force to secure light sheet metal parts without over-stressing the tool.
Adjust the retract stop on the fly when a packaging line switches to a different carton height, ensuring precise mechanical end-positioning without reprogramming logic.
Fine-tune the contact position during sealing assembly, letting the double-rod equal-force design provide consistent 739N pressure at 0.7 MPa on both extend and retract.
Confirm this 10mm adjustment window covers your required end-position variance. If you need less force, stepping down to the 32mm bore yields 345 N both ways at 0.5 MPa; if you need more, stepping up to the 50mm bore provides 825 N. If your application never requires position changes, a fixed-stroke SED cylinder is sufficient. Remember, the adjustable air cushion at both ends only decelerates the load near stroke end; it does not hold position on air loss, so use an external rod lock for fail-safe holding. This PT1/4 ported cylinder is dimensionally interchangeable per ISO 15552.
Quick checklist
The 10mm adjustment window allows you to mechanically dial the retract end position, providing an effective stroke range of 190mm to 200mm. You set the stop screw on the back rod and lock it in place during commissioning.
Because the rod exits both ends, the force is identical in both directions. It generates 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a maximum of 108 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.